1. Загрузите последнюю версию встроенного ПО из Центра загрузки.
2. Разархивируйте скачанный файл
3. Включите устройство Cudy и подождите, пока светодиод не загорится.
4. Подключитесь к сети Кади через Wi-Fi или Ethernet.
5. Откройте веб-браузер и перейдите по адресу http://cudy.net или http://192.168.10.1. .
Подробную информацию см. в Как войти в веб-интерфейс Cudy Router?
6. Обновите прошивку.
а. Дополнительные настройки —> Прошивка. Выберите прошивку, которую вы разархивировали для загрузки.
б. На странице Общие настройки->Прошивка можно выполнять онлайн-обновление и локальное обновление.
Примечание. Поддерживается только прошивка 2.x.x или выше.
7. Ожидание перезагрузки маршрутизатора 5 минут.
Комментариев: 129
“@Dear Dom,
Please download the firmware version 2.3.0 or 2.3.1, there is an intermediate firmware in the package. You must update the intermediate firmware first. Then update the new 2.3.x firmware.”
I tried this and it doesn’t work, I have already intermediate firmware installed, when I try to update to 2.3.x it always failed, after it failed I have to unplug power cable (because wifi is not working, cable connection is ok) then plug again and router still have intermediate firmware version. Please provide to us proper fix, changing browser/computer does not resolve the problem.
@Dear Dom,
Please download the firmware version 2.3.0 or 2.3.1, there is an intermediate firmware in the package. You must update the intermediate firmware first. Then update the new 2.3.x firmware.
“Same problem as other users there, WR1500 firmware update is impossible, tried on different browsers and computers and it always failed”
Same problem as other users there, WR1500 firmware update is impossible, tried on different browsers and computers and it always failed
@Dear vbence121,
Please try to change a web browser to update. We suggest the chrome. If still fail, please try to change a computer to update.
“I also have issue with the WR1500. I try to flash the intermediate firmware file but after it restarts it never connects back. After 10 minutes I unplug and restart the device but then it’s back to the old firmware”
I also have issue with the WR1500. I try to flash the intermediate firmware file but after it restarts it never connects back. After 10 minutes I unplug and restart the device but then it’s back to the old firmware