1. Загрузите последнюю версию встроенного ПО из Центра загрузки.
2. Разархивируйте скачанный файл
3. Включите устройство Cudy и подождите, пока светодиод не загорится.
4. Подключитесь к сети Кади через Wi-Fi или Ethernet.
5. Откройте веб-браузер и перейдите по адресу http://cudy.net или http://192.168.10.1. .
Подробную информацию см. в Как войти в веб-интерфейс Cudy Router?
6. Обновите прошивку.
а. Дополнительные настройки —> Прошивка. Выберите прошивку, которую вы разархивировали для загрузки.
б. На странице Общие настройки->Прошивка можно выполнять онлайн-обновление и локальное обновление.
Примечание. Поддерживается только прошивка 2.x.x или выше.
7. Ожидание перезагрузки маршрутизатора 5 минут.
Комментариев: 173
Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!
@Dear STEVE,
Thank you for you feedback. We will follow it.
“Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated.""
Hi Cudy Team,
This is a follow-up to my previous report on system-wide reboots on the Cudy P5 (R21) at 802.11ax channel widths of 80 MHz and 160 MHz.
After analyzing the syslog I identified two additional root causes:
1. fw_version: 0×250902ab → WLAN.HK.2.5.0.9, built 2021-06-18 — nearly 5 years old
2. board_id: 0xff → P5-specific BDF not loaded, using generic calibration profile
Both issues have been reported to Cudy support. Stable only at 40 MHz channel width until firmware is updated."
@Dear Dante Salvetti,
Our technical support has sent you the latest firmware via email. Please check.
“Good morning. I have an LT400 EU V1.0 router, firmware version 1.7.4-20210303-112556.
I can’t update the firmware to a later version, either via Wi-Fi or LAN. What can I do? I might need a compatible firmware. Could you send it to me? Thank you. Dante Salvetti”
Good morning. I have an LT400 EU V1.0 router, firmware version 1.7.4-20210303-112556.
I can’t update the firmware to a later version, either via Wi-Fi or LAN. What can I do? I might need a compatible firmware. Could you send it to me? Thank you. Dante Salvetti