1. Загрузите последнюю версию встроенного ПО из Центра загрузки.
2. Разархивируйте скачанный файл
3. Включите устройство Cudy и подождите, пока светодиод не загорится.
4. Подключитесь к сети Кади через Wi-Fi или Ethernet.
5. Откройте веб-браузер и перейдите по адресу http://cudy.net или http://192.168.10.1. .
Подробную информацию см. в Как войти в веб-интерфейс Cudy Router?
6. Обновите прошивку.
а. Дополнительные настройки —> Прошивка. Выберите прошивку, которую вы разархивировали для загрузки.
б. На странице Общие настройки->Прошивка можно выполнять онлайн-обновление и локальное обновление.
Примечание. Поддерживается только прошивка 2.x.x или выше.
7. Ожидание перезагрузки маршрутизатора 5 минут.
Комментариев: 173
@Dear Danila Bogatyrev,
This firmware is a ZIP file. Please unzip the file before update.
“Hello,
I have a Cudy LT500 Outdoor V1.0 router.
Current firmware version:
2.1.10-20240528-163250
I am trying to update the firmware to:
LT500Outdoor-R35-2.4.9-20250625-180244-flash.zip
When I try to update manually through the web interface using the firmware file, I get the following error message:
“File blocked. Please try again.”
The router shows the uploaded file name, file size and MD5, but then blocks the update.
I also tried the automatic firmware update. In this case, the firmware file seems to download, but after that nothing happens. The router does not start the upgrade process and the firmware version remains the same.
I also checked the system log and found the following messages:
lede: not fit firmware
lede: firmware format error
Router model: LT500 Outdoor V1.0
Current firmware: 2.1.10-20240528-163250
Firmware file tried: LT500Outdoor-R35-2.4.9-20250625-180244-flash.zip
Best regards."
Hello,
I have a Cudy LT500 Outdoor V1.0 router.
Current firmware version:
2.1.10-20240528-163250
I am trying to update the firmware to:
LT500Outdoor-R35-2.4.9-20250625-180244-flash.zip
When I try to update manually through the web interface using the firmware file, I get the following error message:
“File blocked. Please try again.”
The router shows the uploaded file name, file size and MD5, but then blocks the update.
I also tried the automatic firmware update. In this case, the firmware file seems to download, but after that nothing happens. The router does not start the upgrade process and the firmware version remains the same.
I also checked the system log and found the following messages:
lede: not fit firmware
lede: firmware format error
Router model: LT500 Outdoor V1.0
Current firmware: 2.1.10-20240528-163250
Firmware file tried: LT500Outdoor-R35-2.4.9-20250625-180244-flash.zip
Best regards.
Dear JAD AL CHIDIAC,
Please send me the error text. In addition, please tell me the current firmware and hardware version. Then tell me the name of the firmware you plan to update. I will check.
“Hello, i am trying to upgrade my router’s firmware and i am uploading the latest extracted .bin file but still it is not letting me update once i click on upload it tells me that the file format is not supported. any clue please”
Hello, i am trying to upgrade my router’s firmware and i am uploading the latest extracted .bin file but still it is not letting me update once i click on upload it tells me that the file format is not supported. any clue please
@Dear Luis,
Our technical support has sent you the firmware via email. Please check.
“Hi, is possible the last firmware for LT400 EU V1.0 version?.
Tnx!”