Modo WISP:
No modo WISP, o roteador permite que vários usuários compartilhem a conexão de internet do WISP. Os dispositivos da porta LAN compartilham o mesmo IP do WISP por meio da porta sem fio. Quando conectado ao WISP, a porta sem fio funciona como uma porta WAN.
Topologia de rede comum:
Passo 1: Abra um navegador da web e vá para http://cudy.net ou http://192.168.10.1.
Para mais detalhes, consulte Como fazer login na interface web do Cudy Router?
Passo 2: A janela Configuração rápida será exibida, escolha "WISP", então vá"Próximo".
Etapa 3: Escolha o seu "Fuso horário".
Passo 4: Selecione a rede host que deseja estender. Clique em 'Conectar'.
Ou clique em Configurações gerais->WISP->Habilitar e então selecione a rede host que você deseja estender.
Etapa 5: Digite a senha sem fio da rede host.
Observação: Certifique-se de que a senha da rede sem fio digitada esteja correta, caso contrário, a configuração não será bem-sucedida.
Etapa 6: Personalize o nome e a senha da rede sem fio ou mantenha-os como padrão.
Passo 7: Clique em "Salvar e aplicar" para concluir a configuração.
Passo 8: Aguarde alguns segundos para que o sistema reinicie. Quando a página de login aparecer novamente, você poderá aproveitar a internet.
110 comentários
I recently purchased the Cudy WR6500 as an upgrade to my older Cudy WR3000. My original plan was to use the new WR6500 as my main router and repurpose the WR3000 as a Mesh node to extend my network coverage.
However, I ran into a major issue: the WISP mode is missing in the WR6500 settings, whereas it works perfectly fine on the older WR3000.
Because the WR6500 lacks WISP support, I am currently forced to use it only as a Mesh extension instead of the main router, which completely degrades its performance and defeats the purpose of the upgrade.
Could the support team or anyone here provide me with a firmware version for the WR6500 that includes the WISP functionality?
I recently purchased the Cudy WR6500 as an upgrade to my older Cudy WR3000. My original plan was to use the new WR6500 as my main router and repurpose the WR3000 as a Mesh node to extend my network coverage.
However, I ran into a major issue: the WISP mode is missing in the WR6500 settings, whereas it works perfectly fine on the older WR3000.
Because the WR6500 lacks WISP support, I am currently forced to use it only as a Mesh extension instead of the main router, which completely degrades its performance and defeats the purpose of the upgrade.
Could the support team or anyone here provide me with a firmware version for the WR6500 that includes the WISP functionality?
I have the 4GvLTE N300 V3.0
I’ve got firmware 2.5.12 installed, but still no WISP
Could you send me the firmware that allows for Wisp please. I’m happy to test it if it’s Beta.
Hi, can I use the wr1200 to feed wired internet into my lan from a starlink mini wifi router. I would like to not have a wire from the starlink into my existing lan which covers 4 floors of a concrete building. Is this compatible.
Thank you.
@Dear Paulo Ruben Brás Ferreira,
Yes, the AX1500 models will support WISP function if you update it to the latest firmware version. You can download the firmware via the link below.
https://www.cudy.com/pages/download-center/search
“Dear Cudy Support!
Is there any version of the firmware, that supports WISP on AX1500 router?
Thank you and Best regards!”