| Versão do modelo | ||
|---|---|---|
| Versão do modelo | M3000S 1.0 | |
| Memory/Storage | ||
| Memory/Storage | Flash/ROM | 128 MB (1 Gbit) NAND |
| DDR/RAM | 256 MB (2 Gbit) DDR3 | |
| Wireless | ||
| Wireless | 5 GHz Wi-Fi Speed | 2402 Mbps |
| 2.4 GHz Wi-Fi Speed | 574 Mbps | |
| 5 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
| 2.4 GHz Wi-Fi Streams | 2T2R (2×2 MIMO) | |
| Wi-Fi Antennas | 4× Internal | |
| FEM or PA/LNA |
|
|
| Beamforming | True | |
| Range Performance |
Max: 220 m (722 ft) Tested in open-space environments with minimal interference. Actual WiFi range may vary depending on layout and wall materials. Refer to the Wall Performance specifications for placement suggestions. |
|
| Wall Performance |
Two wooden walls with thickness < 10 cm (4'') One concrete wall with thickness < 20 cm (7'') or two concrete walls with thickness < 10 cm (4'') |
|
| Indoor Coverage Reference |
2 Pack: 180 m² (1900 sq ft) 3 Pack: 250 m² (2700 sq ft) Applied to wireless backhaul situation. Place in the center of each floor, with a maximum of three obstacles to each room. |
|
| Interfaces | ||
| Interfaces | Gigabit RJ45 Ports | 2 |
| Ethernet Notes | Port 1 is the WAN port by default. All ports are LAN ports in Mesh satellite mode | |
| LED |
|
|
| Physical Buttons |
|
|
| Power Interfaces | DC Jack | |
| Power | ||
| Power | Power Methods | DC |
| Power Input | 12V⎓1A | |
| Power Adapter in the Box |
Input: 100-240V~, 50/60Hz Output: 12V⎓1A |
|
| Max Power Consumption (W) | 11.5W | |
| Idle Power Consumption (W) | 4.2W | |
| Reliability | ||
| Reliability | Environment |
|
| Certifications | ||
| Certifications | FCC, CE | |
| Mechanical | ||
| Mechanical | Installation | Desktop |
| Package Content | ||
| Package Content |
|
|
| Versão do modelo | ||
|---|---|---|
| Versão do modelo | M3000S 1.0 | |
| Wireless | ||
| Wireless | Wi-Fi Standards | Wi-Fi 6 |
| Max Wi-Fi Modulation | 1024-QAM | |
| Wi-Fi Efficiency |
|
|
| Max Capacity | 512 | |
| Recommended Client Upper Limit | 200 | |
| Max Wi-Fi Channel Width | 160 MHz | |
| Wi-Fi Security | WPA/WPA2/WPA3 | |
| Guest Network | 2.4 GHz, 5 GHz | |
| WPS | True | |
| General | ||
| General | Operation Modes |
|
| Mesh | Cudy Mesh | |
| Mesh Backhaul |
|
|
| Multi-Band Backhaul | True | |
| WAN Mode |
|
|
| Network | ||
| Network | QoS | Per-User Rate Limiting |
| DHCP |
|
|
| IP Versions | IPv4/IPv6 | |
| IPv6 Protocols |
|
|
| IPTV/VLAN |
|
|
| TTL Customization |
|
|
| IGMP |
|
|
| Forwarding |
|
|
| Firewall |
|
|
| Application Layer Gateway |
|
|
| Utilities | ||
| Utilities | VPN Server |
|
| VPN Client |
|
|
| DNS Options |
|
|
| DNS over TLS Providers |
|
|
| Wake on LAN | True | |
| Online Detection | True | |
| Management | ||
| Management | Parental Controls |
|
| All Devices Management |
|
|
| Per-Devices Management |
|
|
| Content Management |
|
|
| System | ||
| System | LED Control | True |
| Local Control Method |
|
|
| Remote Control Method |
|
|
| Firmware Upgrade |
|
|
| Reliability |
|
|
| Diagnostic Tools |
|
|
| Languages |
|
|
| Dashboard | ||
| Dashboard | Panel |
|
| Charts |
|
|
- A taxa de transferência real de dados sem fio pode variar em função das condições da rede, limitações do cliente e fatores ambientais, incluindo layout do edifício, obstáculos e localização do cliente.
- O desempenho real de vários dispositivos pode ser afetado pelos tipos de aplicativos utilizados, pela largura de banda total disponível e pelas capacidades dos seus dispositivos. Conectar dispositivos Wi-Fi mais antigos (padrões legados) pode reduzir a eficiência geral. O uso de recursos de eficiência requer dispositivos clientes compatíveis que também suportem esses recursos. Encontre mais informações sobre os recursos de eficiência suportados na seção de software da planilha de especificações.