Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
462 komentarze(-y)
If you could release the OpenWRT initial firmware for the M3000 V2 it would be great. I was looking for the M3000 in white and ended up by buying 2xPack M3000 V2 (White ones) without noticing these are actually not equal in terms of hardware to the M3000 V1 (Black ones)
File is invalid. Please retry.
Uploaded File: openwrt-24.10.1-ramips-mt7621-cudy_wr1300-v3-squashfs-sysupgrade.bin
Size: 7.25 MB (7602797 B)
MD5: f7192538cfeeb661bac625306f170cda
Firmware Version
2.3.9-20250208-115514
Hardware
WR1300 V3.0
What’s the problem?
Dear All,
It works now.
Device seem bricked after flashing the Cudy (signature free) firmware from G Drive. After that giving a static ip (eg 192.168.1.5) to myself, trying to ping 192.168.1.1 and it didn’t work, thus I was thinking something was wrong during the flash. But my eth cable was plugged in the whole time.
Just for once, I unplugged and replugged it after the flashing. It worked! It was then able to ping the device.
And after I flashed the Openwrt again from within the gui.
Thanks to Cudy Support and all other people for all the replies below.
Dear Support,
Trying to flash OpenWRT on M1300 v2. Whenever I flash the intermediate firmware from G Drive, using WebGUI>Firmware, it flashes and reboots. But then I cant reach the device, neither via LAN nor WiFi. Only the white(or bluish) led is on after reboot, and stalls in that state kind of being bricked.
The only way back was to push latest Cudy firmware via tftpd64.
Tried more than several times, and if this helps, sometimes the device downloads the firmware from tftpd immediately, which is like, sometimes it reboots into a ‘firmware download’ state, I guess.
What am i missing, why would you think the device stalling after the regular method?
Thanks,
I am wanting to flash openWRT onto an AP3000 however I can’t see an option for the device on the google drive link. Is there a version for the AP3000? Thanks