Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
895 komentarze(-y)
@Dear Guglielmo,
No, the OpenWrt firmware for WR1300 3.0 and 4.0 are different. We must wait for some developer to develop the OpenWrt firmware for WR1300 4.0 first. Then we can offer the intermediate firmware for WR1300 4.0.
“Hello, I have baught a bunch of WR1300. Some of them are v3, but some came as v4. On v3 i could download the intermediate firmware and the install OpenWrt. Are you going to release the same for v4? I’d like to install openwrt also on them. Thank you! With OpenWrt this is a great product”
@Dear Tod,
Our technical support has sent you the firmware via email. Please check.
“Hello, Would it be possible to send me the TR3000 (256mb flash) intermediary firmware?
It says the file is invalid when I try to upgrade it with TR3000 V1.
Thank you in advance."
@Dear Tomáš,
Our technical support has sent you the firmware via email. Please check.
“Hello,
Could you please provide the signed OpenWrt sysupgrade intermediary firmware for the AP3000 v1.0 Ceiling model, via email or ideally via your Google Drive repository?
Thank you for your support.
Best regards,
Tomáš Stejskal"
@Dear atish,
1. Please recover the firmware to the Cudy official firmware. Here is the instruction attached. Please download the Cudy official firmware 2.4.7 or later, then rename it to the recovery.bin to recover. You can download the firmware on the website below.
https://www.cudy.com/pages/download-center/tr3000-1-0
2. We have changed the model of the flash in the router TR3000 1.0. So the old intermediate firmware and OpenWrt firmware for TR3000 1.0 will not work. Please use the new intermediate firmware.
3. You must add the patch to the OpenWrt firmware, the the OpenWrt firmware will work. If you know how to upload it to the OpenWrt project. Please help to do it. The patch is also attached.
“hi , i am trying to install the signed software on my tr3000 to install openwrt, but gets stucked , can u please provide me with the new signed firmware . i had tried to do it on earlier router and it had gone through. i think the company has installed a new flash version whats why it is not going through . please check and revert back .”
Hi,
I do have TR3000 256MB. Can I get the intermediate firmware, thanks a lot.