警告
このウェブページには, OpenWrt システムをサポートするデバイスのソフトウェアがリストされています。ソフトウェアをダウンロードしてインストールする前に, OpenWrt プロジェクトは組み込みデバイスを対象とした Linux オペレーティングシステムであることをご承知おきください。OpenWrt は, 単一の静的ファームウェアを作成するのではなく, パッケージ管理機能を備えた完全に書き込み可能なファイルシステムを提供します。これにより, ベンダーが提供するアプリケーションの選択や設定から解放され, パッケージを使用してあらゆるアプリケーションに適したデバイスをカスタマイズできます。開発者にとって, OpenWrt は, 完全なファームウェアを構築することなくアプリケーションを構築できるフレームワークです。ユーザーにとって, これは完全なカスタマイズが可能になり, デバイスをこれまで想像もできなかった方法で使用できるようになることを意味します。
説明
- このファイルは, ルータが Cudy Web UI で動作する場合にのみ使用できます。
- ルーターが既にOpenWRT UIで動作している場合は, まずCudy公式ファームウェアに復元し, その後, このファームウェアでルーターをアップグレードしてください。
- ルーターをCudy公式ファームウェアに復元するにはどうすればいいですか？ダウンロードしたファイル内のreadmeをお読みください。
保証：
クディはここに宣言する
- 弊社 Cudy は, Shenzhen Cudy Technology Co., Ltd. がリリースしていないソフトウェアについては保証いたしません。
- Shenzhen Cudy Technology Co., Ltd. がリリースしていないソフトウェアがインストールされた製品については, いかなる保証も行いません。
- openwrt ソフトウェアを使用する必要がある場合は, Cudy の公式 Web サイトからダウンロードすることをお勧めします。
署名チェックを削除するには, OpenWrt ファームウェアをダウンロードしてください。ドライブ
OpenWrt ファームウェア ファインダー (Cudy からはリリースされていません):OpenWrt ファームウェアセレクター
1335件のコメント
@Marek M,
Would you please list the models that need downgrade the firmware? We will fix these models first.
“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”
@Dear Marek M.
Thank you for contacting Cudy support team. Thank you for your kindly advice. We will provide your feedback to the product department for evaluation. I think we will do better about this.
“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”
@cruday,
Our technical support has sent you the firmware via email. Please check.
“hi, I need cudy_ap3000indoor-v1-sysupgrade.bin…outdoor doesnt work”
@Dear Luis,
Our technical support has contacted you via email. Please check.
“Hi, Thank you for the fast answer.
Already flashed the file indicated (2.0) and it keeps saying the same… FILE IS INVALID… Any idea?
Thanks in advance.”
Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!