Avvertenze
Questa pagina web elenca il software dei dispositivi che supportano il sistema OpenWrt. Prima di scaricare e installare il software, tieni presente che OpenWrt Project è un sistema operativo Linux destinato ai dispositivi incorporati. Invece di provare a creare un singolo firmware statico, OpenWrt fornisce un filesystem completamente scrivibile con gestione dei pacchetti. Ciò ti libera dalla selezione e configurazione dell'applicazione fornita dal fornitore e ti consente di personalizzare il dispositivo attraverso l'uso di pacchetti adatti a qualsiasi applicazione. Per gli sviluppatori, OpenWrt è il framework per creare un'applicazione senza dover costruire attorno ad essa un firmware completo; per gli utenti questo significa la possibilità di personalizzazione completa, di utilizzare il dispositivo in modi mai immaginati.
Descrizione
- Questo file può essere utilizzato solo quando il router funziona con l'interfaccia utente web di Cudy.
- Se il router funziona già con l'interfaccia utente OpenWRT, l'utente deve prima ripristinarlo sul firmware ufficiale Cudy. E poi aggiorna il router con questo firmware.
- Come ripristinare il router sul firmware ufficiale Cudy? Si prega di leggere il file Leggimi nel file scaricato.
Garanzia:
Cudy dichiara
- Noi, Cudy, non ci assumiamo alcuna garanzia per alcun software che non sia rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Non assumiamo alcuna garanzia per i prodotti che hanno installato software non rilasciato da Shenzhen Cudy Technology Co., Ltd.
- Se hai bisogno di utilizzare il software openwrt, ti suggeriamo di scaricarlo dal sito Web ufficiale di Cudy.
Scarica il firmware OpenWrt per rimuovere il controllo della firma: Drive
Ricerca firmware OpenWrt (non rilasciato da Cudy): Selettore firmware OpenWrt
1319 commenti
Dear Support,
Trying to flash OpenWRT on M1300 v2. Whenever I flash the intermediate firmware from G Drive, using WebGUI>Firmware, it flashes and reboots. But then I cant reach the device, neither via LAN nor WiFi. Only the white(or bluish) led is on after reboot, and stalls in that state kind of being bricked.
The only way back was to push latest Cudy firmware via tftpd64.
Tried more than several times, and if this helps, sometimes the device downloads the firmware from tftpd immediately, which is like, sometimes it reboots into a ‘firmware download’ state, I guess.
What am i missing, why would you think the device stalling after the regular method?
Thanks,
I am wanting to flash openWRT onto an AP3000 however I can’t see an option for the device on the google drive link. Is there a version for the AP3000? Thanks
Добрый день, нужна прошивка OpenWrt для CUDY LT500D, можете выслать? Либо прошивка для разблокировки подписи, чтоб попробовать собрать свой OpenWRT.
@GRZEGORZ ANDRZEJCZYK,
Cudy routers don’t support to set the WiFi speed when working on official firmware, If you have updated the OpenWrt firmware of the router, you can try to find it on the web page.
Or you can just change the WiFi mode, such as 802.11b and 802.11 a to working on a lower speed.
“It loaded fine and I made a bridge between the fishing sonar and the phone. I just don’t know how, reduce the wifi speed to 1Mbit or 6Mbit to have better range?”
It loaded fine and I made a bridge between the fishing sonar and the phone. I just don’t know how, reduce the wifi speed to 1Mbit or 6Mbit to have better range?