כיצד אוכל להגדיר את לקוח ה-VPN לגשת לשרת VPN מרוחק?

Is it possible to achieve VPN cascading using a TR3000.
The configuration is:
1. A VPN server (VPN A) is set up at Site A.
2. A TR3000 is situated at Site B where the device have the VPN client enabled to connect to VPN A and VPN server (VPN B) is also enabled.
3. At Site C, client devices have VPN clients connected to VPN B.
All traffic generated by client devices at Site C is encrypted using VPN B protocol goes to TR3000. The TR3000 decrypts traffic from the clients by VPN B server and encrypts it again using VPN A protocol before sending it to VPN A. This is the solve the problem where devices at Site C do not have reliable routes to Site A directly.

@Meehow,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.

“Last problem exists on p5 with the latest software available”

@Meehow,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.

“Hello, I have a problem with Wireguard site to site vpn. It’s connecting to destination router, however I cannot access local subnet from remote subnet. It’s working the other way. I also spotted that route 0.0.0.0/0 is injected to routing table despite the fact I only specified remote subnets as destination for vpn tunnel policy. What is the solution as I cannot access ssh and check and correct vpn settings manually?”

Last problem exists on p5 with the latest software available

Hello, I have a problem with Wireguard site to site vpn. It’s connecting to destination router, however I cannot access local subnet from remote subnet. It’s working the other way. I also spotted that route 0.0.0.0/0 is injected to routing table despite the fact I only specified remote subnets as destination for vpn tunnel policy. What is the solution as I cannot access ssh and check and correct vpn settings manually?