כיצד אוכל להגדיר את לקוח ה-VPN לגשת לשרת VPN מרוחק?

@Meehow,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has sent you the solutions via email. Please check.

“Last problem exists on p5 with the latest software available”

@Meehow,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.

“Hello, I have a problem with Wireguard site to site vpn. It’s connecting to destination router, however I cannot access local subnet from remote subnet. It’s working the other way. I also spotted that route 0.0.0.0/0 is injected to routing table despite the fact I only specified remote subnets as destination for vpn tunnel policy. What is the solution as I cannot access ssh and check and correct vpn settings manually?”

Last problem exists on p5 with the latest software available

Hello, I have a problem with Wireguard site to site vpn. It’s connecting to destination router, however I cannot access local subnet from remote subnet. It’s working the other way. I also spotted that route 0.0.0.0/0 is injected to routing table despite the fact I only specified remote subnets as destination for vpn tunnel policy. What is the solution as I cannot access ssh and check and correct vpn settings manually?

@Vit,
Dear Customer,
Thank you for contacting Cudy support team.
Our technical support has contacted you via email. Please check.

“hello!
wr3000h vpn settings work incorrectly. when i setup openvpn or wireguard clients some settings don’t work. don’t work the most important setting – VPN Policy (Domain). Rule Allow listed only Domains doesn’t work.
maybe you have new firmware or some solution.
Thanks.
| HW: WR3000H V1.0 | FW: 2.2.7-20240906-085755 |”