Hoiatused
See veebileht loetleb OpenWrt süsteemi toetavate seadmete tarkvara, enne tarkvara allalaadimist ja paigaldamist palume arvestada, et OpenWrt Project on Linuxi operatsioonisüsteem, mis on suunatud manussüsteemidele. Selle asemel, et püüda luua üksikut staatilist püsivara, pakub OpenWrt täielikult kirjutatavat failisüsteemi koos paketihaldusega. See vabastab teid müüja poolt pakutavate rakenduste valikust ja konfiguratsioonist ning võimaldab teil kohandada seadet pakettide abil mis tahes rakendusele sobivaks. Arendajate jaoks on OpenWrt raamistik, mille abil saab luua rakenduse, ilma et oleks vaja ehitada selle ümber täielikku püsivara; kasutajate jaoks tähendab see võimalust täielikuks kohandamiseks, et kasutada seadet viisil, mida nad pole kunagi ette kujutanud.
Kirjeldus
- Seda faili saab kasutada ainult siis, kui teie ruuter töötab Cudy veebi kasutajaliidese all.
- Kui ruuter juba töötab OpenWRT UI all, peaks kasutaja esmalt taastama selle Cudy ametliku firmware'ile. Ja seejärel uuendada ruuterit selle püsivara abil.
- Kuidas taastada ruuter Cudy ametlikule püsivara? Palun lugege alla laaditud faili readme.
Garantii:
Cudy deklareerib käesolevaga
- Me, Cudy, ei võta garantiid ühegi tarkvara eest, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Me ei võta garantiid toodete eest, millele on paigaldatud tarkvara, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Kui teil on vaja kasutada openwrt tarkvara, soovitame selle alla laadida Cudy ametlikust veebisaidist.
Laadige alla OpenWrt püsivara, et eemaldada allkirja kontroll: Ajama
OpenWrt Firmware Finder (ei ole Cudy poolt välja antud): OpenWrt Firmware Selector
1530 kommentaari
Hello Cudy Support,
I have a Cudy WR3000H V1.0 (EU).
Router information:
Model: WR3000H_EU V1.0
Serial Number: WR3000H254300*** EU 1.0
Stock Firmware: 2.4.5 US
I would like to install the official OpenWrt firmware.
I understand that routers with SN 2543 or later require the new OpenWrt intermediate firmware for the F50L1G41LC flash.
I found the intermediate firmware:
cudy_wr3000h-v1-sysupgrade_20251119.bin
However, I understand that some WR3000H units with the F50L1G41LC flash and Motorcomm YT8821 WAN PHY report “File is invalid” when using this image.
Could you please provide me with the correct Cudy-signed OpenWrt intermediate firmware specifically compatible with my hardware revision?
I would then like to upgrade to an official OpenWrt version 24.10.5 or newer.
If you were in my shoes, would you buy a product from a company that doesn’t respond? I was planning to order another item, but unfortunately, I will not buy—nor let anyone around me buy—anything else from a company that fails to reply. Definitely do not buy anything from the Cudy brand; I certainly won’t buy from them again, and I’m going to post about this on every forum.
Cudy x6 v2
Hi, I bought a Cudy X6 v2, but it doesn’t have 5GHz FCC channels. Could you please send me the US firmware? I would really appreciate it. Thank you.
TR3000-256MB EAEU1.0 — request for intermediate firmware and recovery file
Hello Cudy Support,
I sent this request to support@cudy.com on September 28 and again on September 29 (full S/N included in the emails), but have not received a reply yet, so I am posting here as well.
- Model: TR3000-256MB, EAEU1.0
- Production week in S/N: 2623
- Current stock firmware: 2.5.27-20260804-190139
I have NOT flashed anything yet. Another TR3000 256MB owner (S/N week 2626) reported on your recovery FAQ page on September 26 that the router stopped booting after flashing the intermediate firmware from the TR3000-256MB download page (DTS_and_intermediate_firmware, May 2025) on top of stock 2.5.21. My stock firmware is even newer and is not listed on the download page, so I want to confirm compatibility before flashing.
Could you please send me by email:
1. The intermediate firmware confirmed to work with my unit and stock 2.5.27.
2. The stock firmware for TFTP recovery (recovery.bin), ideally 2.5.27.
3. Which NAND flash chip is used in TR3000-256MB units from this batch.
4. Which OpenWrt image to install afterwards (cudy_tr3000-256mb-v1-squashfs-sysupgrade.bin from OpenWrt 25.12.x?).
Thank you!
Cudy x6 v2
Hi, I bought a Cudy X6 v2, but it doesn’t have 5GHz DFS FCC channels. Could you please send me the US firmware? I would really appreciate it. Thank you.