Hoiatused
See veebileht loetleb OpenWrt süsteemi toetavate seadmete tarkvara, enne tarkvara allalaadimist ja paigaldamist palume arvestada, et OpenWrt Project on Linuxi operatsioonisüsteem, mis on suunatud manussüsteemidele. Selle asemel, et püüda luua üksikut staatilist püsivara, pakub OpenWrt täielikult kirjutatavat failisüsteemi koos paketihaldusega. See vabastab teid müüja poolt pakutavate rakenduste valikust ja konfiguratsioonist ning võimaldab teil kohandada seadet pakettide abil mis tahes rakendusele sobivaks. Arendajate jaoks on OpenWrt raamistik, mille abil saab luua rakenduse, ilma et oleks vaja ehitada selle ümber täielikku püsivara; kasutajate jaoks tähendab see võimalust täielikuks kohandamiseks, et kasutada seadet viisil, mida nad pole kunagi ette kujutanud.
Kirjeldus
- Seda faili saab kasutada ainult siis, kui teie ruuter töötab Cudy veebi kasutajaliidese all.
- Kui ruuter juba töötab OpenWRT UI all, peaks kasutaja esmalt taastama selle Cudy ametliku firmware'ile. Ja seejärel uuendada ruuterit selle püsivara abil.
- Kuidas taastada ruuter Cudy ametlikule püsivara? Palun lugege alla laaditud faili readme.
Garantii:
Cudy deklareerib käesolevaga
- Me, Cudy, ei võta garantiid ühegi tarkvara eest, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Me ei võta garantiid toodete eest, millele on paigaldatud tarkvara, mida ei ole välja andnud Shenzhen Cudy Technology Co., Ltd. .
- Kui teil on vaja kasutada openwrt tarkvara, soovitame selle alla laadida Cudy ametlikust veebisaidist.
Laadige alla OpenWrt püsivara, et eemaldada allkirja kontroll: Ajama
OpenWrt Firmware Finder (ei ole Cudy poolt välja antud): OpenWrt Firmware Selector
1319 comments
Hello,
I recently purchased a Cudy RE3000 and I am trying to download the firmware from your Google Drive folder:
https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj?usp=sharing
However, both Google Drive’s virus scanner and Microsoft Defender flag the RE3000 firmware file as potentially unsafe.
Could you please check this issue and confirm whether the file is safe to use? If possible, please also provide a clean download link and the official checksum for the firmware file.
Thank you.
@Dear Emamul,
M3000 1.0_2.0.zip is the correct one. Please unzip and update it.
“Hello, I have a Cudy M3000 V2 (EU 2.0) with firmware 2.5.10 and the new YT8821 hardware variant. The Google Drive linked from your OpenWrt page only contains M3000 1.0_2.0.zip with a V1 sysupgrade image. Could you please send me the latest Cudy-signed OpenWrt intermediary firmware for the M3000 V2 YT8821 so I can install official OpenWrt?”
Hello, I have a Cudy M3000 V2 (EU 2.0) with firmware 2.5.10 and the new YT8821 hardware variant. The Google Drive linked from your OpenWrt page only contains M3000 1.0_2.0.zip with a V1 sysupgrade image. Could you please send me the latest Cudy-signed OpenWrt intermediary firmware for the M3000 V2 YT8821 so I can install official OpenWrt?
@Dear IURII,
Do you install mesh system with other Cudy routers? If yes, you can reset the router to factory default. Do not install mesh system with other Cudy routers. Then update it again.
“Hello,
I have a Cudy WR3000P V1.0 (EU).
Current firmware:
2.4.22-20251125-101108
Serial Number:
S0001005261700095
When I try to install the OpenWrt intermediate firmware
cudy_wr3000p-v1-sysupgrade_20251119.bin
(downloaded from the OpenWrt Software Download page),
the router rejects it with the message:
“Invalid file. Please try again.”
Could you please provide the correct intermediate firmware
for this hardware revision and firmware version?
Thank you."
Hello,
I have a Cudy WR3000P V1.0 (EU).
Current firmware:
2.4.22-20251125-101108
Serial Number:
S0001005261700095
When I try to install the OpenWrt intermediate firmware
cudy_wr3000p-v1-sysupgrade_20251119.bin
(downloaded from the OpenWrt Software Download page),
the router rejects it with the message:
“Invalid file. Please try again.”
Could you please provide the correct intermediate firmware
for this hardware revision and firmware version?
Thank you.