See artikkel juhendab teid, kuidas avada oma külalistele täiendav Wi-Fi. See pakub ainult internetiühendust ja eraldi põhivõrgust. Näiteks külalisvõrku ühendamisel, ei saa seade juurdepääsu kohalikule võrgule, ei saa sisse logida veebiliidesesse jne.
Hoiatus: Külalisvõrk ei ole saadaval Access Point Mode'is.
Sammu 1: Avage veebilehitseja ja minge aadressile http://cudy.net või http://192.168.10.1.
.Detailide saamiseks vaadake Kuidas Cudy Routeri veebiliidesesse sisse logida?
Sepp 2: Mine Suurendatud seaded->Gastvõrk.
Samm 3: Looge 2,4GHz või 5GHz külalisvõrk vastavalt oma vajadustele.
Vaikimisi külalisvõrk on avatud Wi-Fi nimega 'Cudy-Guest-2.4G' või 'Cudy-Guest-5G'.
Sepp 4: SetKrüpteerimine to WPA-PSK/WPA2-PSK segarežiim, seejärel määrake kergesti meeldejääv parool.
Sammu 5: 'Salvesta &; Rakenda' seaded. Nüüd saate oma külalisvõrku pääseda, kasutades määratud SSID-d ja parooli.
Et tohi lubada Peitatud võrku, kui te ei soovi käsitsi sisestada seda SSID-d Wi-Fi juurdepääsu jaoks.
84 comments
I have a 8 Cudy M1300’s all wired uplinks, and when I enable the guest network on the main M1300, it configures it, and the SSID broadcast from all nodes, but cannot connect to the guest network, I have triid everything with no luck
@Andrii,
Dear Customer,
Thank you for contacting Cudy support team.
The factory firmware of WR1500 doesn’t support guest network function. But there is a good news is that we will release the Cudy platform firmware like other Cudy wireless router soon. I think it will be less than 2 weeks. Then, if your update the new firmware, the router will support it. For now we have only beta version. If you want to try the beta version, we can send it to you.
“I could not find any Guest Wifi settings for WR1500. Please advise how to setup guest network on WR1500”
I could not find any Guest Wifi settings for WR1500. Please advise how to setup guest network on WR1500
@Bialar
Dear Customer,
Thank you for contacting Cudy support team.
Sorry to tell you that the guest network is forbidden to access the devices in the main subnet. So you can’t access these devices from the internet. But We will provide your feedback to the product department for evaluation to make a change.
“Is there a way to access servers in the “main ip-space” from the guest network?
Example:
- Device gets a public IP-address 11.22.33.44 from ISP
- Trying to access servers (through port forwarding) using the IP above from guest network seems to fail
- Trying to access servers IP (on the “main IP space”) also fails. But this is of course expected so no problems here.
My case: I have kind of home automation systems running on a device connected to Cudy. These allow remote control using port forwarding. This remote control works if accessing them outside the guest network. In my case these services can be reached using cellular connection on a phone but not from guest network. It’s kind of funny that these can be reached from about anywhere in the internet except the guest network.
In ASUS-routers I have used this works (local devices can be accessed from guest network using public IP from ISP).
Device in question: Cudy P5 AX3000"
Is there a way to access servers in the “main ip-space” from the guest network?
Example:
- Device gets a public IP-address 11.22.33.44 from ISP
- Trying to access servers (through port forwarding) using the IP above from guest network seems to fail
- Trying to access servers IP (on the “main IP space”) also fails. But this is of course expected so no problems here.
My case: I have kind of home automation systems running on a device connected to Cudy. These allow remote control using port forwarding. This remote control works if accessing them outside the guest network. In my case these services can be reached using cellular connection on a phone but not from guest network. It’s kind of funny that these can be reached from about anywhere in the internet except the guest network.
In ASUS-routers I have used this works (local devices can be accessed from guest network using public IP from ISP).
Device in question: Cudy P5 AX3000