See artikkel juhendab teid, kuidas avada oma külalistele täiendav Wi-Fi. See pakub ainult internetiühendust ja eraldi põhivõrgust. Näiteks külalisvõrku ühendamisel, ei saa seade juurdepääsu kohalikule võrgule, ei saa sisse logida veebiliidesesse jne.
Hoiatus: Külalisvõrk ei ole saadaval Access Point Mode'is.
Sammu 1: Avage veebilehitseja ja minge aadressile http://cudy.net või http://192.168.10.1.
.Detailide saamiseks vaadake Kuidas Cudy Routeri veebiliidesesse sisse logida?
Sepp 2: Mine Suurendatud seaded->Gastvõrk.
Samm 3: Looge 2,4GHz või 5GHz külalisvõrk vastavalt oma vajadustele.
Vaikimisi külalisvõrk on avatud Wi-Fi nimega 'Cudy-Guest-2.4G' või 'Cudy-Guest-5G'.
Sepp 4: SetKrüpteerimine to WPA-PSK/WPA2-PSK segarežiim, seejärel määrake kergesti meeldejääv parool.
Sammu 5: 'Salvesta &; Rakenda' seaded. Nüüd saate oma külalisvõrku pääseda, kasutades määratud SSID-d ja parooli.
Et tohi lubada Peitatud võrku, kui te ei soovi käsitsi sisestada seda SSID-d Wi-Fi juurdepääsu jaoks.
84 comments
@Dear Fernando,
What is the firmware version of your WR3000?
“I have a Cudy WR3000 set up with a guest network, but the problem is that devices connected to the guest network can see and communicate with each other, and I can’t find any option to disable this behavior. Of course, they are separated from the main LAN but devices on the guest network should not discover each other, specifically for IoTs. I know that on OpenWrt it’s just a matter of checking a box (isolate clients or similar), but I can’t find where the option is in Cudy or which firmware version offers this feature. Can you help me?”
I have a Cudy WR3000 set up with a guest network, but the problem is that devices connected to the guest network can see and communicate with each other, and I can’t find any option to disable this behavior. Of course, they are separated from the main LAN but devices on the guest network should not discover each other, specifically for IoTs. I know that on OpenWrt it’s just a matter of checking a box (isolate clients or similar), but I can’t find where the option is in Cudy or which firmware version offers this feature. Can you help me?
@Dear Brain,
I need some more information to fix this issue.
1.What are the firmware version of your WR1500 and AP3000?
2. How do you install mesh system with them? via ethernet cable or wireless backhaul?
“I have setup mesh network with Cudy WR1500 as a Router Mode, and 2 items Cudy AP3000 as satelite mode.
I want to enable Guest WIFI and already setup the SSID with 2,4 Ghz and 5Ghz, but the SSID Guest WiFi cannot connect in my phone in Samsung A56 5G, error message (cannot get IP address).
Do you have any suggestion ?”
I have setup mesh network with Cudy WR1500 as a Router Mode, and 2 items Cudy AP3000 as satelite mode.
I want to enable Guest WIFI and already setup the SSID with 2,4 Ghz and 5Ghz, but the SSID Guest WiFi cannot connect in my phone in Samsung A56 5G, error message (cannot get IP address).
Do you have any suggestion ?
@Dear Nick,
Sorry, doesn’t support this feature now. We have provided your feedback to our Product Manager for evaluating.
“I have the WR1500 with firmware 2.3.10-20251215-170019. The guest network does not go through the vpn. All the rest of the network uses it normally. Is there a way to have the guest use the vpn as well?
Thank you!”