Industrial Switch
IF1005P
1 3

Conmutador PoE+ industrial de 5 puertos 10/100 Mbps

Conmutador PoE+ industrial de 5 puertos 10/100 Mbps, IF1005P 2.0

IF1005P 2.0

A 5-FE industrial switch for networking in harsh conditions such as manufacturing, transportation, maritime, oil & gas, and mining.

  • 5× FE, Shielded, ±6kV Surge Resistant
  • 4× 802.3at/af Modo A PoE
  • IP40, -40~75 °C (-40~167 °F)
  • Dual DC Inputs, Requires 44~57V Power
  • Polarity Reverse Protection
  • Protección contra cortocircuitos
  • Broadcast Storm Prevention On/Off
  • Vigilancia activada/desactivada
  • Perro guardián
  • Soporte de carril DIN integrado
Ver todos los detalles

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Survives Heat, Cold, Surge, and ESD

Built with a industrial-grade design and components, the device achieves Level 4 EMC to withstand surge and ESD from power and Ethernet ports. The industrial-grade ICs, together with extra heatsink design, allow stable operation in extreme temperatures and ensures long-term durability.

Electrical & Physical Robustness

Dual DC Inputs. 44-57V Voltage Range.

The switch supports dual DC inputs (44–57V) for extra redundant protection. It also includes reverse-polarity and short-circuit protection to ensure stable operation in complex power environments.

Rugged Casing. Reinforced Construction.

The wave-like heatsink not only improves heat dissipation but also enhances structural rigidity. Internally, the PCB and components are reinforced with extra mounting points for anti-vibration supports.

Essential Features for Reliable Network Operation

PoE Auto Recovery

Turn on the Watchdog function to monitor port activity. If a connected device freezes and stops transmitting data for 5 minutes, the Watchdog will automatically reboot the corresponding PoE port.

Suppress Broadcast Storm

Protect the network's bandwidth from abnormal broadcast activities such as ARP attack. Once the broadcast packets flood from a port, the port will be automatically shut down.

Extend for 250 m Transmission

For long-distance networking, enable the Extend mode to connect clients up to 250 meters away by limiting the port speed to 10 Mbps.

VLAN Isolates Downlink Ports for Improved Safety

Turn on the VLAN mode to prevent client-side hacking, preventing sensitive data from leaking. The downlink clients will only be able to communicate with the uplink devices.

Built for Versatile Situations

Transportation

Retail/Business

Smart City

Manufacturing

Versión del modelo
Versión del modelo IF1005P 2.0
Interfaces
Interfaces 10/100 Mbps RJ45 Ports 5
10/100 Mbps RJ45 PoE Ports #1~#4
Max Power on a Single PoE Port 30W
PoE Port Notes The PoE ports comply with IEEE 802.3at/af standards.
Shielded RJ45 Port True
Extend Mode Ports #1~#4
VLAN Mode Ports #1~#4
LED
  • Power 1
  • Power 2
  • Link/ACT of Each Ethernet Port
  • PoE Status of Each PoE Port
Power Input 4-Pin Terminal Block
Physical Buttons
  • PoE Watchdog On/Off
  • VLAN On/Off
  • Extend On/Off
  • Broadcast Storm Prevention On/Off
Physical Buttons Note The PoE Watchdog will attempt to reboot the plugged-in clients that have been inactive for 5 minutes. Do not turn it on for clients with online auto-upgrade feature.
Performance
Performance Copper Speed and Distance
  • Cat. 3 or higher cable: 100 meters at 10 Mbps
  • Cat. 5 or higher cable: 100 meters at 100 Mbps
  • Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note 250-meter transmission is only available on the Extend Mode ports when the Extend Mode is activated.
MAC Address Table 2048
Max Switching Capacity 1 Gbps
Max Forwarding Rate 0.744 Mpps
Jumbo Frame 2 KB
Packet Buffer 768 Kbit
Power
Power Power Methods DC
Power Redundancy Dual Inputs
DC 44-57V⎓
Max Power Consumption 120W
Max Power Excluding PoE 0.9W
Idle Power Consumption 0.25W
Polarity Reverse Protection True
Short Circuit Protection True
Switching
Switching 802.3 Protocols
  • 802.3at PoE
  • 802.3af PoE
  • 802.3i 10BASE-T
  • 802.3u 100BASE-TX
  • 802.3x Flow Control
Reliability
Reliability Grounding Methods Grounding Point
Safety IEC/EN 62368
EMC EN55032 Class A
EN55035 Class A
EMI FCC 47 CFR Part 15B Class A
EMS IEC/EN 61000-4-2, Level 4 ESD: Contact: 8kV; Air: 15kV
IEC/EN 61000-4-3, Level 4 RS: 80 MHz to 1 GHz: 30 V/m
IEC/EN 61000-4-4, Level 4 EFT: Power: 2kV; RJ45: 4kV
IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 6kV
IEC/EN 61000-4-6, Level 3 CS: 10V
IEC/EN 61000-4-8, Level 5 PFMF
IEC/EN 61000-4-9, Level 5 PMF
IEC/EN 61000-4-10, Level 5 DOMF
EMS Note The levels listed in each EMS field are the highest level defined in the IEC/EN standard.
Shock IEC 60068-2-27
Vibration IEC 60068-2-6
Free Fall IEC 60068-2-32
Environment Operating Temperature: -40 ℃ ~ 75 ℃ (-40 ℉ ~167 ℉)
Storage Temperature: -40 ℃ ~ 85 ℃ (-40 ℉ ~ 185 ℉)
Operating Humidity: 5% ~ 95% non-condensing
Storage Humidity: 5% ~ 95% non-condensing
Mechanical
Mechanical Dimension Device:
33.5×86×118 mm
1.32×3.39×4.65 inches
Mounting Space:
33.5×130×138 mm
1.32×5.12×5.43 inches
Product Weight 341.5 g (12.05 oz.)
Casing Material Aluminum
Ingress Protection IP40
Installation DIN-Rail
Package Content
Package Content
  • IF1005P
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 182×137×65 mm
7.17×5.39×2.56 inches
Retail Package Weight 473.0 g (16.68 oz.)
Units per Carton 20
Carton Net Weight 9.5 kg (20.94 lbs)
Carton Gross Weight 10.1 kg (22.27 lbs)
Carton Dimension 38.8×34.8×29.8 cm
15.28×13.7×11.73 inches