Only Cudy routers that have been upgraded to a firmware version that supports Cudy APP management can be managed using the APP.
Therefore, it is very likely that your Cudy router has not been upgraded to a firmware version that supports APP management.
You can download the Cudy APP by scanning the QR code below.
Please download the latest firmware version to upgrade.
Model: Cudy's wireless products will gradually release new firmware to support APP management. The following table lists some product models that already support APP. Other models may have been released. Please go to the download center to check the new firmware.
| WR1300 V2 & V3 |
| M3000 |
| M1300 |
| M1200 |
| WR3000 |
| WR1200 |
| WR1500 |
| M1800 |
| X6 |
| WR1300E V2 |
| LT700E |
| LT15E |
Note: The firmware version of all the Cudy routers with 2.x.x will support Cudy APP management.
Please click here to feedback if you have any questions or advice when using Cudy APP.
42 comentarios
Cuando actualizo el router WR1500 de la versión 1.0.4-20241205-747393 a la última versión, solo parpadea y nunca se apaga, solo cuando lo desconecto de la electricidad
@Dear Aleksandar Ispanovic,
You router mode LT400 doesn’t support Cudy APP cloud management function.
“I cannot bind my router to my account. Please advise.”
I cannot bind my router to my account. Please advise.
@Dear Since
1. Please try to change a phone and try again.
2. If the problem remains, what is OS of your phone? Android or iOS?
“few months ago, I cannot bind the Cudy account to my X6 V2. I always get a Invalid Request message. The router has the latest firmware available (2.1.0) and the latest app is used.”
Since few months ago, I cannot bind the Cudy account to my X6 V2. I always get a Invalid Request message. The router has the latest firmware available (2.1.0) and the latest app is used.