Update: December 24,2025 Good news!
The OpenWrt forum has merged the pacth which supports the new Flash F50L1G41LC and update the OpenWrt firmware to the version 24.10.5. So if you download the OpenWrt firmware version 24.10.5 or newer version in the future to update the Cudy related models. There will be no problem.
Important Notice: November 24, 2025
Cudy AX3000 series routers manufactured starting in November 2025 (TR3000, SN code start with 2543 or later. 2543 in the SN means the 43th week in the year 2025 ) use the new Flash F50L1G41LC. Upgrading to older versions of OpenWrt intermediate firmware or OpenWrt firmware will prevent the device from booting. Therefore, we will be releasing new firmware updates for these products to add restrictions. If the device is detected to be using the new Flash, it will not be able to upgrade to older firmware versions 2.3.X or earlier. Additionally, previously provided OpenWrt intermediate firmware for older Flash devices will not be compatible.
Affected models include: AP3000 Outdoor 1.0, AP3000 Wall 1.0, M3000 1.0/2.0, TR3000 1.0, WR3000E 1.0, WR3000H 1.0, WR3000S 1.0, and WR3000P 1.0.
Cudy has released the new OpenWrt intermediate firmwares, which have been updated to Google Drive. Please switch to the new intermediate firmware.
Regarding the OpenWrt firmware, we are still waiting for the official OpenWrt forum to release an OpenWrt firmware compatible with the new Flash. Once released, please use the new OpenWrt firmware.
If the SN code is less than 2543. It uses the old flash. There is no such problem.
Warnings
This webpage lists software of devices which support OpenWrt system, before download and install the software, please note that OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Description
- This file can only be used when your router works under Cudy web UI.
- If the router already works under OpenWRT UI, user should restore it to Cudy official firmware first. And then upgrade the router with this firmware.
- How to restore the router to Cudy official firmware? Please read the readme in the file downloaded.
Warranty:
Cudy hereby declares
- We, Cudy, do not undertake warranty for any software that is not released by Shenzhen Cudy Technology Co., Ltd.
- We do not assume any warranty for products that have installed any software not released by Shenzhen Cudy Technology Co., Ltd.
- If you need to use openwrt software, we suggest you download it from Cudy's official website.
Download OpenWrt Firmware to Remove Signature Check: Drive
OpenWrt Firmware Finder (Not Released by Cudy): OpenWrt Firmware Selector
1294 comentarios
@Dear wahlfisch,
Still need some time. Please wait patiently.
“Dear Support, Any news regarding AP1300E Wall Firmware mid firmware without signing?”
Dear Support !
Purchased AP3000_P v1 access point.
Tried to flash according to the instructions from your website in openwrt through the transition firmware taken from you on google drive.
After flashing to the transition firmware, the access point lost access via lan cable ( wifi is not enabled ).
On the openwrt website found information:
As of jan. 2026, some devices are shipped with an alternate chip for single LAN port.
Now the access point is not available via lan or wi-fi.
What should I do to get the access point back online?I also can’t download the factory firmware via Recovery using the instructions on your website because the lan port is still not available.
Dear Support, Any news regarding AP1300E Wall Firmware mid firmware without signing?
“@Dear wahlfisch,
OK, I will do it.
““Sorry, there is no intermediate firmware for AP1300E Wall AP. The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware”
Dear Support,
It would be easier, if you would provide some kind of intermediate firmware first (with fw signing disabled and so on)""
@Dear Marcel,
We don’t have plan to add the VLAN + SSID support on the WR3000H and WR11000.
In addition, The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“These are great devices. I’ve bought quite a few of them — around 10 units of the WR3000H and recently also a few BE11000.
What’s a bit unfortunate is that the WR3000H with OpenWrt supports VLANs for different SSIDs. The BE11000, however, understandably doesn’t have OpenWrt yet. On the other hand, the stock firmware on the BE11000 already supports assigning SSIDs to VLANs.
So the situation is a bit paradoxical: the BE11000 doesn’t have OpenWrt, while the WR3000H on stock firmware cannot assign SSIDs to VLANs (which OpenWrt can do). Because of this, users are forced to break the mesh network if they want to use VLANs properly.
It’s a bit disappointing because these are really good devices. The hardware clearly supports VLAN + SSID functionality, but unfortunately the stock firmware implementation on the WR3000H does not.
Is there any chance that VLAN + SSID support will be added to the firmware? Or do you perhaps plan to support OpenWrt on the BE11000 in the future?
I’d just like to know whether it makes sense to wait, or if I should simply move away from Cudy devices."
These are great devices. I’ve bought quite a few of them — around 10 units of the WR3000H and recently also a few BE11000.
What’s a bit unfortunate is that the WR3000H with OpenWrt supports VLANs for different SSIDs. The BE11000, however, understandably doesn’t have OpenWrt yet. On the other hand, the stock firmware on the BE11000 already supports assigning SSIDs to VLANs.
So the situation is a bit paradoxical: the BE11000 doesn’t have OpenWrt, while the WR3000H on stock firmware cannot assign SSIDs to VLANs (which OpenWrt can do). Because of this, users are forced to break the mesh network if they want to use VLANs properly.
It’s a bit disappointing because these are really good devices. The hardware clearly supports VLAN + SSID functionality, but unfortunately the stock firmware implementation on the WR3000H does not.
Is there any chance that VLAN + SSID support will be added to the firmware? Or do you perhaps plan to support OpenWrt on the BE11000 in the future?
I’d just like to know whether it makes sense to wait, or if I should simply move away from Cudy devices.