1. Download and unzip the file from here.
2. Download the latest firmware from the official website and rename it to 'recovery.bin'. Note: You must put it in the same file of Tftpd tools.
3. Power off your Router. Unplug the power adapter or press the POWER button.
4. Connect your computer the Router's LAN port with an Ethernet cable.
5. Configure your computer's IP address to be '192.168.1.88' manually.
6. Run 'tftp32.exe'.
7. Run 'netsh advfirewall set allprofiles state off' in the command line to disable Windows firewall, otherwise tftp will be blocked. Or you can disable the firewall on the Control Panel of your computer. As shown below.
8. Press the 'Reset' button/hole and hold it. Before the Router is powered on and before tftp start to download the firmware, don't release the 'Reset' button/hole.
9. Power on the Router.
10. When the Lights are all flashing fast, or when tftp start to download the firmware, you can release the 'Reset' button/hole.
11. When the light flashes slowly, the upgrade is complete.
12. Please recover your computer's IP address to be dynamic IP.
13. Done.
142 comentarios
@Dear MD RAKIBUL ISLAM,
Yes, you can do it. This method also can recover the broken firmware issue.
“Hi Cudy, Can I follow all of these step to unbrick my Cudy WR1200 V2 which will be bricked due to sudden load shedding during firmware update 🙂? Please help”
Hi Cudy, Can I follow all of these step to unbrick my Cudy WR1200 V2 which will be bricked due to sudden load shedding during firmware update 🙂? Please help
@Dear Alan,
Please check if your use the correct firmware. You must use the firmware for TR3000 256MB, which the firmware version on Cudy official website is 2.3.9. Then you can follow the steps as the instruction.
“I am confident that it is the 256MB version because I purchased it from China, and the box, router, label, etc., all indicate “256MB.” However, when I opened the router, I discovered that the chip memory is ESMT F50L1G41LB only 128MB. You can check my post here: [https://www.right.com.cn/forum/thread-8441740-1-1.html] for a screenshot. I also sent this information to sales@cudy.com but haven’t received a reply.”
I am confident that it is the 256MB version because I purchased it from China, and the box, router, label, etc., all indicate “256MB.” However, when I opened the router, I discovered that the chip memory is ESMT F50L1G41LB only 128MB. You can check my post here: [https://www.right.com.cn/forum/thread-8441740-1-1.html] for a screenshot. I also sent this information to sales@cudy.com but haven’t received a reply.
@Dear Franciska,
1. Please try to power off the router and power on again.
2. Try to change a computer to update the router and check again.
“Hallo
i want help update my router WR1500 ,update not working i have router with this Firmware Version: 1.0.4-20241205-747393 i try update to new but now router not working
Help please”