Preparación:
1. Instale las antenas y colóquelas hacia arriba.
2. Inserte la tarjeta SIM en la ranura hasta que escuche un clic.
3. Conecte el adaptador de corriente al router y enciéndalo.
Paso 1:Abra un navegador web y vaya ahttp://cudy.netohttp://192.168.10.1Ingrese la contraseña de administrador para iniciar sesión.
Nota:La contraseña de administrador predeterminada es "administración" si la versión del firmware es 1.X.X.Hemos eliminado la contraseña de administrador predeterminada desde la versión de firmware 2.X.X. Debe crear la contraseña de administrador la primera vez que inicie sesión.
Para más detalles, consulte¿Cómo iniciar sesión en la interfaz web de Cudy Router?
Paso 2:Aparecerá la ventana de Configuración rápida, seleccione su 'Huso horario'.
Paso 3:Configure los parámetros APN. Generalmente, solo necesitamos mantener el perfil APN en "Auto". Luego, haga clic en "Siguiente". El router seleccionará los parámetros APN automáticamente. (Recomendado)
Si desea personalizar los parámetros APN, puede seleccionar "Manual" en el perfil APN e ingresar los parámetros APN correctos.
Nota:Si no está seguro de los parámetros APN, comuníquese con su proveedor de servicios de Internet.
Paso 4:Establezca el nombre y la contraseña de la red inalámbrica o manténgalos como predeterminados.
Paso 5:Haga clic en "Guardar y aplicar" para completar la configuración.
Paso 6:Cuando el estado esté Conectado, podrá disfrutar de Internet.
34 comentarios
Dear Cudy team. How should I configure your router lt500D to be able to connect two CCTV cameras via Ethernet cable? I was able to connect only one that supports wifi, second one can be connected only via cable. Your router does not see these devices in lan network.
@Dear Amigos,
The AT command for checking EARFCN is AT+QENG=“servingcell” , You can also check it in the syslog. For example
AT+QENG=“servingcell” → AT+QENG=“servingcell” +QENG: “servingcell”,“NOCONN”,“LTE”,“FDD”,250,01,41720C,9,1802,3,5,5,454C,-89,-10,-59,14,35 OK
The “1802” is the EARFCN.
For cell ID, we don’t have plan to change the format.
“Hi! In first iam need to say thanks for very balanced products with Cudy brand. Anyway i have some question about Cudy LT400 Outdoor functions.
1 – in Status we have data about LTE connection as MCC MNC CID and PCID, but not EARFCN and not eNodeB ID. How i can get it? Modem have this data by cell.
2- Cell ID have hex format. possible convert it in dec format Base ID?
and very important
need AT commands LIST for internal modem.
Thanks!"
Hi! In first iam need to say thanks for very balanced products with Cudy brand. Anyway i have some question about Cudy LT400 Outdoor functions.
1 – in Status we have data about LTE connection as MCC MNC CID and PCID, but not EARFCN and not eNodeB ID. How i can get it? Modem have this data by cell.
2- Cell ID have hex format. possible convert it in dec format Base ID?
and very important
need AT commands LIST for internal modem.
Thanks!
Dear Stanley, Please contact samcudy.com.
“Looks as if I’m having problems sending you photos please give details address for you to receive my photos and video thank you.”
Looks as if I’m having problems sending you photos please give details address for you to receive my photos and video thank you.