警告
本網頁列出了支援OpenWrt系統的設備的軟體，在下載和安裝軟體之前，請注意OpenWrt Project是一個針對嵌入式設備的Linux作業系統。 OpenWrt 並沒有嘗試建立單一靜態韌體，而是提供了一個具有套件管理功能的完全可寫入檔案系統。這使您無需選擇供應商提供的應用程式和配置，並允許您透過使用軟體包來自訂設備以適應任何應用程式。對於開發人員來說，OpenWrt 是建立應用程式的框架，而無需圍繞它建立完整的韌體；對使用者來說，這意味著完全客製化的能力，以前所未有的方式使用裝置。
描述
- 此檔案僅當您的路由器在 Cudy Web UI 下運作時才能使用。
- 如果路由器已經在OpenWRT UI下工作，用戶應先將其恢復到Cudy官方韌體。然後用這個韌體升級路由器。
- 如何將路由器恢復至Cudy官方韌體？請閱讀下載文件中的自述文件。
保固：
Cudy特此聲明
- 我們 Cudy 對非深圳市 Cudy 科技有限公司發布的任何軟體不承擔任何保證。
- 對於安裝了非深圳市酷迪科技有限公司發布的任何軟體的產品，我們不承擔任何保證。
- 如果您需要使用openwrt軟體，建議您從Cudy官網下載。
下載 OpenWrt 韌體以刪除簽名檢查：驅動程式
OpenWrt 韌體查找器（不是由Cudy 發布）：OpenWrt 韌體選擇器
1319 則留言
@Dear Bourn,
Our technical support has sent you the intermediate firmware for AP1300 V1.0 via email. Please check.
“Hello Cudy Support
I am still waiting for an intermediate firmware for AP1300 v1.0 that would allow upgrading without signature verification.
Could you please provide it?”
@Dear Bourn,
Generally, we need to check the OpenWrt firmware first. Do you develop the OpenWrt firmware? Is there a git submit?
“Hello Cudy Support
I am still waiting for an intermediate firmware for AP1300 v1.0 that would allow upgrading without signature verification.
Could you please provide it?”
Hello Cudy Support
I am still waiting for an intermediate firmware for AP1300 v1.0 that would allow upgrading without signature verification.
Could you please provide it?
@Dear Aleksandr,
The OpenWrt firmware is not developed by Cudy but by the developers. We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware.
“Hello, will there be an OpenWRT firmware for the Cudy WR1300 v4?”
@Dear Michael,
There is no other official method.
“Dear Cudy Support Team ,
Iv’e already tried this method , it didn’t help . Maybe you have other suggestions ,please ?
Thanks in advance :)
@Dear Michael,
Regarding the tftpd recovering firmware method. You can refer to this article.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=b98054b19&ss=r
You can download the firmware for you router via this link.
https://www.cudy.com/pages/download-center/wr3000-1-0"