1.从下载中心下载最新固件。
2. 解压下载的文件
3. 打开 Cudy 设备电源，等待 LED 变为常亮。
4. 通过 WiFi 或以太网连接到 Cudy 的网络。
5.打开网络浏览器并转到http://cudy.net或http://192.168.10.1。
详细信息请参阅如何登录Cudy路由器的Web界面？
6.升级固件。
a.高级设置 -> 固件，选择你解压后的固件进行上传。
b.常规设置->固件页面可以进行在线升级和本地更新。
注意：仅固件 2.xx 或更高版本支持。
7.等待5分钟路由器重启。
41 条评论
@Rodrigo,
Our technical support has sent you the solutions via email. Please check.
“Hello! I have a pack of three M3000 1.0 routers. One of them is running firmware version 2.2.6, while the other two are on version 2.0.0. I can’t remember if I updated them automatically or manually. I would like to update all of them to the latest version. How can I do this? I can’t find a manual firmware download link, and when I try the automatic search, it says they are already on the latest version, which doesn’t make sense since they are the same product with different firmware versions. Thank you in advance.”
Hello! I have a pack of three M3000 1.0 routers. One of them is running firmware version 2.2.6, while the other two are on version 2.0.0. I can’t remember if I updated them automatically or manually. I would like to update all of them to the latest version. How can I do this? I can’t find a manual firmware download link, and when I try the automatic search, it says they are already on the latest version, which doesn’t make sense since they are the same product with different firmware versions. Thank you in advance.
@Michał Zatoński,
Our technical support has sent you the solutions via email. Please check.
“Hello
I own an RE1800 extender. After configuring the connection to the existing 2.4 and 5 Ghz Wifi network, the device blinks red the 2.4 network works but the 5GHz network does not work.
I have no way to update the software, I can only configure the device as an access point and repeater.”
@PS.LEONARDO PEREZ,
Estimado cliente:
Sí, puede actualizar el último firmware. Preste atención a descomprimir el firmware antes de actualizar.
“Buenas, tengo el P5 con la versión 1.15.15-20230616-112055, Como puedo actualizarlo a la última versión, estuve revisando en la pagina pero no he podido actualizar, por favor me puede regalar el archivo. Gracias.”
Hello
I own an RE1800 extender. After configuring the connection to the existing 2.4 and 5 Ghz Wifi network, the device blinks red the 2.4 network works but the 5GHz network does not work.
I have no way to update the software, I can only configure the device as an access point and repeater.