PoE 配件
POE10 1.0
即将停产
有新硬件版本
1 2

PoE 中继延长器

PoE 中继延长器, POE10 1.0

POE10 1.0

PoE 中继延长器, 可将 PoE 距离延长 100 米。

  • 千兆以太网输入/输出
  • 802.3at/af 标准，最大输出功率 30W 1
  • 802.3at/af 输入
  • 壁挂安装
查看完整详细信息
型号版本
型号版本 POE10 1.0
Protocols
Protocols 802.3 Protocols
  • 802.3i 10 Mbps over Twisted Pair
  • 802.3u 100 Mbps over Twisted Pair
  • 802.3ab 1 Gbps over Twisted Pair
  • 802.3x Flow Control
  • 802.3af PoE
  • 802.3at PoE
PoE
PoE Uplink Stream 1× GbE, 802.3at/af
Uplink PIN Assignment Mode A / Mode B
Downlink Stream 1× GbE, 802.3at/af
Downlink Pin Assignment Mode A
Transimission Distance
  • Cat. 5e or higher cable: 100 meters at Gigabit
  • Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating
Power
Power Power Input ≥30W is recommended
Max Power Output 30W
Max Power Output Note The actual power output depends on input
Max Power Consumption (W) 2W
Reliability
Reliability Power Protection
  • Polarity Protection
  • Overvoltage Protection
  • Short-Circuit Protection
  • Automatic Voltage Regulation
EMC IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV
Environment Ambient Operating Temperature: -10~45 ℃ (14~113 ℉)
Storage Temperature: -40~70 ℃ (-40~158 ℉)
Operating Humidity: 10%~95% non-condensing
Storage Humidity: 5%~95% non-condensing
Certifications
Certifications FCC, CE
Mechanical
Mechanical Install in a Daisy Chain Up to 3 extenders in a chain
Installation
  • Desktop
  • Wall-mount
Dimension 145×60×40 mm
5.71×2.36×1.57 inches
Casing Material Plastic
Package Content
Package Content
  • POE10
  • Mounting Kit
  • Installation Guide
Ordering Information
Ordering Information Retail Package Dimension 133.6×53.8×45.6 mm
5.26×2.12×1.8 inches
Units per Carton 100
Carton Net Weight 7.85 kg (17.31 lbs)
Carton Gross Weight 8.85 kg (19.51 lbs)
Carton Dimension 47×28.2×29.5 cm
18.5×11.1×11.61 inches
  1. 实际可用功率 = 上行供电功率 − 线路损耗 − 设备自身功耗（功耗详情请参见规格表）。建议上行供电使用支持标准 IEEE PoE（54V）的 PoE 交换机或 PoE 适配器。