中国深圳— Cudy 发布了 WR1300 和 WR3000 的新固件，增加了对 Captive Portal 功能的支持。此增强功能允许用户自定义登录体验、加强品牌宣传，甚至设置付费 Wi-Fi。
WR1300 和 WR3000 用户可以从支持页面下载固件，并按照配置页面上的说明升级设备。如果您正在寻找登录配置页面的方法，请参阅“ 如何登录 Cudy 路由器的 Web 界面？ ”
Cudy AP 产品（包括 AP1300、AP3000、AP1200 Outdoor、AP1300 Outdoor、AP3000 Outdoor 和 RE1200 Outdoor）的用户现在可以通过将设备与启用强制门户功能的 WR1300 或 WR3000 配对来激活强制门户功能。其他处于 RE 或 AP 模式的 Cudy 设备在连接到路由器时也将启用强制门户。
Cudy 路由器内置了五个强制门户提供商，设置过程非常简单。在下列提供商处创建帐户后，用户可以在 Cudy 路由器的配置页面上输入配置值以启用强制门户。您可以在WR1300 的模拟器中与 UI 进行交互。
免责声明：实施 Captive Portal 时，请务必注意使用第三方 Captive Portal 解决方案可能存在不同程度的兼容性和安全风险。第三方解决方案由用户自行决定，可能需要额外的配置和故障排除。
Cudy AP 产品预计也将在独立模式下支持 Captive Portal，无需使用另一台路由器作为网关即可启用此功能。列表包括 AP1300、AP1300 Outdoor、AP3000 和 AP3000 Outdoor。Beta 固件测试目前正在进行中。
24 条评论
Hi
I am using the WR3000 Router with captive portal enabled. When users connect to the AX3000 AP node controlled by the WR3000 router, it does not redirtect them to the captive portal.
My setup: Internet → WR3000 Router → Cudy POE Switch → AX3000 AP
The AP’s are wired to the POE switch, and the switch is wired to the WR3000 Router, that is setup with the captive portal.
Please advise how I get the clients to be routed to the captive portal through the AP’s.
@Dear BEN,
The Cudy AP also support remote web management function. You can go to “Advanced Settings” —“Administration” function page. You can enable it and try to login the web page of the AP remotely.
But you need to know. This function requires the public IPv4 address.
In addition, if your AP is working on Wireless router or WISP mode. You can use the zerotier VPN function. Please refer to this instruction attached to set up the zerotier VPN.
https://www.cudy.com/blogs/faq/how-to-remote-connect-cudy-router-via-zerotier
“how can I set my cudy ax3000 outdoor so that I can remotely control without using the cudy app.?”
how can I set my cudy ax3000 outdoor so that I can remotely control without using the cudy app.?
@Dear Justin,
You need to install a portal server and radius server to use the manual option. It is too difficult. I suggest you use the current portal service provider, such as the HOTSTOPSYSTEM. It will be easier.
How can I set up the captive portal to just forward to my website? Do I still need pay for a third party? If the answer is manual can you please share the info I would put in to make it work?