警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1453 条评论
@Dear Mehdi,
There is no OpenWrt firmware for LT500 currently.
“I need to open ssh on cudy Lt500
I could not find any image for that”
where do i find the Openwrt intermediate Firmware (Cudy signed) for
AP3000v1 (AX3000 ceiling mount EU1.0)?
I tried different versions (wall/outdoor) from your google drive without success (e.g. AP3000v1-wall, AP3000-outdoor). If it’s there, please indicate the filename.
Updating the AP3000V1 from 1.1.6.4 to 2.4.6 before didn’t help either.
I need to open ssh on cudy Lt500
I could not find any image for that
@Dear Cudy team,
I can’t use the TR3000. V1_20251118.zip in the Google Drive. Since this is the OpenWRT version 24.10.4. I wrote about it that it will turn my Cudy TR3000 “into a brick”, since my Cudy already has a new flash chip (indicated by SN number). I need a new version from you – 24.10.5, I asked when this version will be available? or if it exists, how and where can I find it?
“@Dear Alexander996,
The intermediata firmware is TR3000 V1_20251118.zip in the Google Drive. Please download it and update.
“Dear Cudy team. I want to flash my Cudy TR3000 router (serial number TR30002545, that is, with a new flash memory chip). And I need OpenWRT version 24.10.5. But you don’t have this version on google drive (there is only 24.10.4), which will turn my Cudy TR3000 into a brick. When will the official release “transitional” version of OpenWRT 24.10.5 from cudy? So that I can upgrade/flash my Cudy router? Could you please send me the official version, which is suitable for my model (with new flash memory chips)?”
@Dear Michael,
You can try to recover the old firmware version. Such as the 2.0.0, 2.2.6. Please connect the LAN port when recovering the firmware.
“Hi Cudy Support Team , I have purchased cudy wr3000 v1 router at the end of y 2023 ,I’ve successpully installed openwrt on my router using intermideate Cudy firmware, that was about 2 years ago. Then year after at 2024 ,I decided to go back to Cudy’s official firmware using OpenWrt system update and latest official firware at that moment .But something went wrong ( as I understood, there was some internal flash incompatibility with newer firmwares and older routers caused by internal flash)
As for today 2026 , my WR3000 v1 router is bootlooping endlessly but I’m able to upload firmware using tftp64.
What I’ve tried:
– Uploading latest official firmware v WR3000-R31-2.4.19 via tftp64 (using WAN port and LAN1 port )
– Uploading itermideate firmware from google drive , using tftp64 via LAN1 port and WAN port ,
– Uploading latest openwrt firmware v24.10.5 using tftp64 via WAN and LAN1 port .
- Uploading openwrt kernel only firmware based on v24.10.5 via WAN and LAN1 port .
Only when uploade official Cudy firmware ,the device rebooted itself autoamtically afer 3-4 minutes. In all cases the device is bootloping after manual or automatic restart.
Do you have any suggestions ? Maybe some firwmare to restore the device ?”