警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1453 条评论
@Dear Cudy team
can you please share Openwrt intermediate Firmware (Cudy signed) for AP3000_P2540 EU v1
Regards!
Dear Sir or Madam,
I attempted to download the file X6+V2.zip from the following Google Drive link:
https://drive.google.com/drive/folders/1BKVarlwlNxf7uJUtRhuMGUqeCa5KpMnj
However, the file was automatically placed into quarantine by my security software because it detected a threat identified as Trojan/Kepavll!rfn.
As a result, I was unable to open or use the file. I wanted to inform you about this issue in case the file needs to be checked, cleaned, or re-uploaded.
Thank you for your assistance.
Kind regards, Laci
@Dear Cudy team,
I bought your router:
TR3000_ZH V1.0
SN: TR3000255001964
Firmware Version: 24.21-20251009-115734
Model: TR3000
Hardware: TR3000 256MB FLASH V1.0
I want to install OpenWrt on it.
As I understand it, first an intermediate firmware is installed, and then OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the correct version of OpenWrt, so I don’t brick the router.
Unfortunately, searching online only gives contradictory options, with the risk of turning the router into a brick.
Your tech support (support.ru@cudy.com), as I understand it, is very busy with their own affairs and directs me to search your website instead of providing specific information.
Therefore, I ask for help here. I don’t want to end up with a brick, and I haven’t been able to find clear information.
Thanks in advance.
I got wr3000 V1,
s/n wr300025270…
I tried to flash openwrt-ramips-mt76x8-cudy_wr300-squashfs-flash.bin (from wr3000 V1 zip from Google drive space) by Cudy GUI.
I got an error. “File is invalid. Please retry”
Any advice?
@Dear Adorfer,
Our technical support has sent you the firmware via email. Please check.
“where do i find the Openwrt intermediate Firmware (Cudy signed) for
AP3000v1 (AX3000 ceiling mount EU1.0)?
I tried different versions (wall/outdoor) from your google drive without success (e.g. AP3000v1-wall, AP3000-outdoor). If it’s there, please indicate the filename.
Updating the AP3000V1 from 1.1.6.4 to 2.4.6 before didn’t help either.”