警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1309 条评论
@Dear conrad,
Our technical support has sent you the new intermediate firmware via email. Please check.
“Dear Support !
I have already connected the serial port and restored the functionality of the cudy AP3000_P v1.
But your transition firmware does not have a recovery mode and does not support the new Motorcomm YT8821 PHY LAN chip.
Could you provide an updated version of the transition firmware for openwrt so that I do not have to restore the access point using the serial port in the future?"
Hello support!
I was create prereleased OpenWRT binary for Cudy WR1300S.
This kernel https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-initramfs-kernel.bin
and Sysupgrade https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-squashfs-sysupgrade.bin
Can you make intermediate transition firmware to switch from stock firmware to OpenWRT ?
Hello Cudy Support,
Could you please send me the intermediate firmware for the AP3000D?
I would like to test installing custom OpenWRT firmware.
Best regards
Dear Support !
I have already connected the serial port and restored the functionality of the cudy AP3000_P v1.
But your transition firmware does not have a recovery mode and does not support the new Motorcomm YT8821 PHY LAN chip.
Could you provide an updated version of the transition firmware for openwrt so that I do not have to restore the access point using the serial port in the future?
@Dear conrad,
The only way to restore it is to remove the AP’s cover, solder the serial port, and then connect the serial port to restore it. Is it possible for you? If yes, we can offer you the instruction to recover it via the serial port.
“Dear Support !
Purchased AP3000_P v1 access point.
Tried to flash according to the instructions from your website in openwrt through the transition firmware taken from you on google drive.
After flashing to the transition firmware, the access point lost access via lan cable ( wifi is not enabled ).
On the openwrt website found information:
As of jan. 2026, some devices are shipped with an alternate chip for single LAN port.
Now the access point is not available via lan or wi-fi.
I also can’t download the factory firmware via Recovery using the instructions on your website because the lan port is still not available.
What should I do to get the access point back online?"