OpenWrt软件下载

@Paul.
Dear Paul.
Thank you for contacting Cudy support team.
1. The OpenWrt firmware is not developed by Cudy, it is developed by the OpenWrt forum. So We need the OpenWrt official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the other OpenWrt firmware.
2. We have not remove the IP address reservation function, we just combine it with the IP/MAC binding, please refer to this article on the website to set the IP reservation.
https://www.cudy.com/blogs/faq/how-to-configure-ip-reservation-on-cudy-router?pos=1&_sid=df70785f3&ss=r

“Dear support,
Is it possible to release an OpenWrt firmware for the WR1200 EU V2.0 router? An update for the official firmware removed the ability to set reserved IP addresses in the DHCP config, which is indispensable for various devices (printers, IP cameras, etc.) to work properly.
Best regards,
Paul Nelosi
"

Dear support,

Is it possible to release an OpenWrt firmware for the WR1200 EU V2.0 router? An update for the official firmware removed the ability to set reserved IP addresses in the DHCP config, which is indispensable for various devices (printers, IP cameras, etc.) to work properly.

Best regards,
Paul Nelosi

@Rudolf
Dear Rudolf,
Thank you for contacting Cudy support team. The default partition of cudy TR3000 doesn’t fully use all the flash, you can adjust the partition size by yourself.
Domestic kwrt has tutorials and released firmware to resize to larger partitions.

“Hi,
after successfully migrating my TR3000 to OpenWrt I am somewhat confused about
the usable flash size.
The page https://openwrt.org/toh/cudy/tr3000 shows the flash layout of the device.
Summing up all the partitions results in 71.4 MiB. So I miss the difference up to 128 MiB.
The OpenWrt boot log shows:
0.924234] Creating 6 MTD partitions on “spi0.0”:
… kern.notice kernel: [ 0.929038] 0×000000000000-0×000000100000 : “BL2”
… kern.notice kernel: [ 0.934696] 0×000000100000-0×000000180000 : “u-boot-env”
… kern.notice kernel: [ 0.940740] 0×000000180000-0×000000380000 : “Factory”
… kern.notice kernel: [ 0.947440] 0×000000380000-0×0000003c0000 : “bdinfo”
… kern.notice kernel: [ 0.953238] 0×0000003c0000-0×0000005c0000 : “FIP”
… kern.notice kernel: [ 0.959358] 0×0000005c0000-0×0000045c0000 : “ubi”
Calculating these partition sizes results in exactly the same size: 71.4 MiB.
May be my understanding of the flash memory is wrong. Hence would like
if someone could explain the missing MiBs. Many thanks in advance.
"

@Khisam
Dear Customer，
Thank you for contacting Cudy support team.
The difference between m3000 v1.0 and m3000 v 2.0 is just the colour.

“Hello! What is the difference between m3000 v1.0 and m3000 v 2.0?
Can I use OpenWrt from v.1.0 for version 2.0? Or where can I find OpenWrt for m3000 v 2.0?”

@William,
Dear William,
Do you plan to issue an OpenWRT port for the WR3600H router ? I would like to implement VLANs.——-No, we don’t develop OpenWrt firmware by ourself. All other OpenWrt firmwares are developed by OpenWrt forum. We need to wait other developers to release the OpenWrt firmware.
Second, any chance to enable HTTPS to access the router instead of HTTP? - WR3600H supports HTTPS, please have a try.
Third, could you publish the API for the router, it would be great to integrate in HomeAssistant & Home Bridge. —-We will provide your feedback to the product department for evaluation.

“Do you plan to issue an OpenWRT port for the WR3600H router ? I would like to implement VLANs.
Second, any chance to enable HTTPS to access the router instead of HTTP?
Third, could you publish the API for the router, it would be great to integrate in HomeAssistant & Home Bridge
thanks a lot
"