警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
424 条评论
@NA,
OK, I will remove the TFTP tools from the package.
“TFTP exe in TR3000 V1.zip is flagged as trojan horse this is very bad!!!!”
@Aleksandar，
Please update back to firmware version 2.0.4, then try again. You can download the 2.0.4 on the website below.
https://www.cudy.com/pages/download-center/wr1300-3-0
TFTP exe in TR3000 V1.zip is flagged as trojan horse this is very bad!!!!
Hello Cudy Support,
I need intermediate OpenWRT firmware for WR1300 V3.0 model to remove signature check. The direct OpenWRT factory image gives “File is invalid” error when trying to flash.
Could you please provide the intermediate firmware file for WR1300 V3.0?
My router details:
- Model: WR1300 EU 3.0
- Current firmware: Firmware Version
2.2.6-20240815-095128
Hardware
WR1300 V3.0
Thank you!
@Marek M,
Would you please list the models that need downgrade the firmware? We will fix these models first.
“Would it be possible for Cudy to test all new official firmware releases to accept the intermediate firmware, without the extra step to downgrade to the old version first (then intermediate firmware, and finally full OpenWrt – flashing 3 times total)? Flashing is time consuming (imagine an ISP doing mass deployment for customers – small ISP like me, not big enough to order your hardware with OpenWrt pre-installed from factory) and each time there is also some risk of bricking the device (power failure etc.), better do it as few times as possible, ideally just make the official firmware accept OpenWrt sysupgrade images directly (maybe just with a warning that it’s not official, warranty void and ask the user for extra confirmation). If the reason for signed firmware is that you’re worried about possible security issues (like malicious remote hacked OpenWrt installs), the extra confirmation could require physical button press (similar to recent MikroTik RouterOS device-mode). Not complaining here, it’s already great that you support OpenWrt, many thanks for that but the process could be made even easier – thanks!”