警告
本网页列出了支持 OpenWrt 系统的设备的软件，在下载和安装软件之前，请注意 OpenWrt 项目是一个针对嵌入式设备的 Linux 操作系统。OpenWrt 不会尝试创建单个静态固件，而是提供具有包管理的完全可写文件系统。这让您无需选择和配置供应商提供的应用程序，并允许您通过使用适合任何应用程序的包来自定义设备。对于开发人员来说，OpenWrt 是一个构建应用程序的框架，无需围绕它构建完整的固件；对于用户来说，这意味着完全自定义的能力，能够以从未想象过的方式使用设备。
描述
- 仅当您的路由器在 Cudy Web UI 下工作时才可使用该文件。
- 如果路由器已经在OpenWRT UI下工作，用户应先将其恢复为Cudy官方固件。 然后使用此固件升级路由器。
- 如何将路由器恢复为 Cudy 官方固件？请阅读下载文件中的 readme。
保修单：
Cudy 特此声明
- 我们 Cudy 不对任何非深圳市多酷科技有限公司发布的软件承担保证责任。
- 对于安装了非深圳市多酷科技有限公司发布的任何软件的产品，我们不承担任何保修。
- 如果您需要使用openwrt软件，建议您从Cudy官网下载。
下载OpenWrt固件删除签名检查： 驱动器
OpenWrt 固件查找器（非 Cudy 发布）： OpenWrt 固件选择器
1309 条评论
Hello Cudy Support Team,
I have a Cudy TR3000 v1.0 router and would like to install OpenWrt on it.
Device details:
- Model: TR3000 v1.0
- Serial Number: S0006956260910307
- Current stock firmware version: 2.4.22-20251113-125907
Could you please:
1. Confirm which flash chip my unit uses (F50L1G41LB or F50L1G41LC) and the flash size (128 MB or 256 MB), based on the serial number above.
2. Send me the Cudy-signed OpenWrt intermediate firmware compatible with my hardware revision, so I can install OpenWrt without bricking the device.
Thank you in advance!
Best regards,
Astemir
@Dear Ilya,
Our technical support has sent you the firmware via email. Please check.
“Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya"
Good afternoon,
I bought your router:
SN: TR3000255200919
Firmware Version : 2.4.22-20251113-125907
Model: TR3000
Hardware: TR3000 V1.0
I want to install OpenWrt on it.
As I understand it, an intermediate firmware is installed first, followed by OpenWrt?
Could you tell me where I can download the intermediate firmware (or the exact name on Google Drive, or please provide a link) and the necessary OpenWrt firmware file so I don’t brick the router?
Unfortunately, searching the internet doesn’t give a clear option, and there is a risk of turning the router into a brick.
Therefore, I am asking for help here.
Thanks in advance,
Kind regards,
Ilya
@Dear Connect Pro,
Our technical support has contacted you via email. Please check.
“Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!”
Hello,
Thank you for your prompt reply.
Yes I did unzip the file and followed the instructions provided by Cudy and OpenWrt but the intermediate file is not being accepted by the firmware upgrade inside the C200P’s web user interface!