MAC 过滤器是无线路由器中使用的一种技术，用于防止未经授权访问网络。MAC 地址是分配给网络上每个设备的唯一标识符。无线路由器使用 MAC 地址来识别设备并确定它应该连接到哪个网络。
步骤 1： 打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
步骤 2：单击安全部分中的高级设置-> MAC 过滤器。
1. 选择“允许除列表之外的所有”。
2. 在在线设备列表中根据 MAC 地址和 IP 地址选择需要阻止的设备。
如果您想要阻止的在线设备不存在，请转到系统状态->设备->复制 MAC 地址->返回MAC 过滤器->自定义并粘贴 MAC 地址。
3.保存并应用，选定的设备将无法再从路由器获取互联网。
1. 选择“仅允许列表”。
2. 选择您允许上网的设备。
3.保存并应用，只有选定的设备可以访问互联网。
这是一个可以做与 MAC 过滤器相同功能的简单方法。
互联网
启用和禁用互联网图标来控制每个设备的互联网访问。
'OPPO-Reno5-5G'无法通过下面的路由器上网。
手术
点击操作图标可以为设备指定新的名称。
允许设备访问互联网的时间段。
例如：‘计算机’设备仅允许在周一上午 10 点至晚上 8 点上网。
12 条评论
@Dear tonalt,
Our technical support has sent you the solutions via email. Please check.
“it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.”
it seems that an activated mac-filter also has an effect on the guest-network in the sense that the router doesn’t connect a guest to the internet! LT700E.
i think most people don’t like this and even worse: the activated mac filter on the guest network is not editable and it even worser it doesn’t use the mac table that is defined for the main wifi network.
so the mac filter is completely useless if one allows a guest-network.
probably i am wrong and the guest network can connect a guest to the internet with an activated mac-filter. but if so, please tell what i can do, to achieve this.
@Dear William and Dragan,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation. In fact, we already have this plan to develop this feature.
“I completely agree with William. I just can’t believe this kind of oversight was made. MAC filtering still hasn’t been added to the latest firmware 2.3.12. Please update the firmware and give us that function.”
“I just bought the Cudy WR11000 WiFi 7 Router and want to use it as an Access Point with MAC Filtering. But I just found out that there is no way to enable MAC Filtering when it is in Access Point mode. Why? You need to allow MAC Filtering in Access Point mode Not just only in Router mode! Please update the firmware and give us that function. I am on the latest firmware version 2.2.19.”
mine is WR3600
I completely agree with William. I just can’t believe this kind of oversight was made. MAC filtering still hasn’t been added to the latest firmware 2.3.12. Please update the firmware and give us that function.