IP 过滤器允许您控制允许进出网络的 IP 流量。
步骤 1： 打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
步骤2：单击安全部分中的高级设置-> IP 过滤器。
1. 选择“允许除列表之外的所有”。
2. 输入您想要阻止的 IP 地址并选择正确的子网掩码。
例：所有设备都无法访问Cudy官网。
3.保存并应用操作。
1. 选择“仅允许列表”。
2. 输入您被允许访问的 IP 地址。
例如：只允许访问 Cudy 网站，其他网站将无法加载。
3.保存并应用操作。
注意：当您不想限制互联网时，请从下拉列表中选择“禁用”并保存设置，而不仅仅是“删除”该项。
8 条评论
@Dear Hein,
For now, there is no limit on the ipv6 connection. I think you don’t need to worry about it. For IPv6 has additional security. And there is alo firewall on the terminals.
“Thanks, but you’ve still not answered my question. How do I prevent inbound connections to IPv6 enabled hosts? I don’t want them to be reachable from the Internet. Outbound connections should work (as it does), but I want inbound connections to be blocked. I.E. I’m able to ping my laptop from the Internet which is not desirable.”
Thanks, but you’ve still not answered my question. How do I prevent inbound connections to IPv6 enabled hosts? I don’t want them to be reachable from the Internet. Outbound connections should work (as it does), but I want inbound connections to be blocked. I.E. I’m able to ping my laptop from the Internet which is not desirable.
@Dear Hein,
You are right. If you enable this and you want to ping the WAN IP address of the router. It will response.
“Thanks,
I have a WR3600 running 2.3.12. SPI is on yes. I see there is an option “Respond to Ping” which is enabled which I assume means the router responds to ping and doesn’t relate to allowing ICMP through the router.”
Thanks,
I have a WR3600 running 2.3.12. SPI is on yes. I see there is an option “Respond to Ping” which is enabled which I assume means the router responds to ping and doesn’t relate to allowing ICMP through the router.
@Dear Hein,
What is the model and firmware of your router?
Do you disable the SPI Firewall of your router? Please check. We will test it.
“Hi,
I’ve enabled IPv6 on my router which works well. All inbound traffic is however allowed, which is undesirable in most cases since all my devices are directly reachable from the internet.
How do I enable IPv6 so I can communicate out without allowing inbound traffic?"