如果您想阻止设备通过路由器访问某些网站，您可以设置域名过滤器来实现。
步骤 1： 打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：单击安全部分中的高级设置->域过滤器。
步骤3：检查域名过滤器页面上的设置。
1.选择“允许除列表之外的所有”。
2.输入您想要阻止的域名。
例如：所有设备都无法访问 YouTube。
3.保存并应用操作。
1.选择“仅允许列表”。
2.输入您可以访问的域名。
例如：只允许访问 YouTube，其他网站将无法加载。
3.保存并应用操作。
笔记：
1.如果您还想限制其他网站，请点击 “添加”添加新条目。一个条目只能输入一个网站。
2.当您不想限制上网时，请从下拉列表中选择“禁用”并保存设置，而不要只“删除”该项。
38 条评论
@Dear Cudybroke,
Our technical support has contacted you via email. Please check.
“Hi, is there any fix for blocking sites?
As I have tried the domain filter, adding required sites and selected ‘allow all except listed’ does no effect. While have also done through parent controls, again to no effect to stopping access to the sites.
I don’t have ipv6 on and DNS are set to defaults on devices.
My cudy router is as follows;
Firmware Version
2.4.16-20250804-150319
Hardware
LT500D V2.0”
Hi, is there any fix for blocking sites?
As I have tried the domain filter, adding required sites and selected ‘allow all except listed’ does no effect. While have also done through parent controls, again to no effect to stopping access to the sites.
I don’t have ipv6 on and DNS are set to defaults on devices.
My cudy router is as follows;
Firmware Version
2.4.16-20250804-150319
Hardware
LT500D V2.0
@Dear WR3600H,
The Domain filter function will not work if you enable the IPv6 function or you change the default DNS server IP address. So please check.
1. Do you enable the IPv6 function on the router? If yes, please disable it and check.
2. What is the DNS IP address of the devices that connect to the router? Is it 192.168.10.1? If not, please change it back to the LAN IP address.
“Domain filter “Allow all except list” doesnt work at all.
Firmware: 2.3.15-20250829-145327
WR3600H V1.0”
Domain filter “Allow all except list” doesnt work at all.
Firmware: 2.3.15-20250829-145327
WR3600H V1.0
@Dear dimy,
Sorry, I think no other way. I will forward it to our R&D team for evaluating.
“Hello, Support!
unfortunately, it does not work. there’s any way to do this?
—
Please input just the “org”, and check.
“How can I make a top-level domain filter? For example, I want all my traffic to go through a configured VPN, except for all sites with a domain “.org”
I can’t add the “*.org” filter in the rules settings.
The firmware: 2.4.4-20250507-170413 WR1300 V3.0”"