路由器的 Wi-Fi 名称 (SSID)、Wi-Fi 密码和安全选项已预先配置。默认 SSID 和密码可在设备标签上找到。您可以根据需要修改无线设置。
步骤 1：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。使用“admin”作为密码登录。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：转到常规设置->无线页面。
智能连接：
启用智能连接后，路由器的 2.4GHz 和 5GHz 网络共享相同的 SSID（网络名称）和密码。
无线2.4G或5G：
应启用 2.4GHz 或 5GHz 无线网络。如果您不想使用无线功能，只需取消选中该框即可。如果禁用无线功能，所有无线设置都将不起作用。
无线SSID和密码：
输入您要修改的新的Wi-Fi名称和Wi-Fi密码。
注意：如果使用无线设备更改无线设置，将会断开连接。
加密：
无加密、WPA-PSK、WPA2-PSK、WPA-PSK/WPA2-PSK（推荐）、WPA2-PSK/WPA3-SAE、WPA3-SAE。
注意：除非必要，否则我们不建议您更改默认设置。
模式：
2.4GHz：802.11b、802.11b+g、802.11b+g+n、802.11b+g+n+ax
5GHz：802.11a、802.11a+n、802.11a+n+ac、802.11a+n+ac+ax
注意：若发现部分客户端无法正常连接 Wi-Fi 6 路由器 5GHz 频段，请将客户端无线网卡驱动更新至最新版本，若仍有问题，请将路由器无线模式调整为 5GHz（802.11a+n+ac）。
渠道：
默认为“自动”。从下拉列表中选择要使用的频道。此字段确定将使用哪个工作频率。除非您注意到干扰问题，否则无需更改无线频道。
通道宽度：
默认为“自动”。如有必要，请从下拉列表中选择通道宽度。
2.4GHz：20MHz 或 40MHz
5GHz：20MHz、40MHz 或 80MHz
发射功率：
最大值、中间值或最小值
默认为‘最大’，如果更改为其他值，Wi-Fi信号将会减弱。
注意：除非必要，否则我们不建议您更改默认设置。
隐藏网络：
如果启用隐藏 SSID，您的 SSID 将不会广播。当您搜索本地无线网络时，您的 SSID 不会显示在无线设备的 Wi-Fi 列表中，因此您必须手动加入网络。
81 条评论
@Dear MN,
Sorry for replying so late due to the Chinese Spring Festival！ We will follow this issue and fix it. Please wait patiently.
“@Support
The issue is that when I configure the device to WPA2-only mode, the obsolete WPA1 protocol remains active. I have reported this multiple times, and you have stated it is not happening. However, my testing confirms it is. This situation suggests either a critical bug in the firmware or a lack of technical understanding of the issue on your support team. Please investigate this seriously"
@Hein de Lange
Without support for 802.11r, a mesh network will never work properly.
Hi,
I’d like to report that the WR3600 mesh functionality is worse than having a group of APs in standalone mode. My two are connected via cable.
There is no benefit in having my two WR3600s meshed apart from just the config being applied to both units.
Drawbacks:
The biggest issue is that the two WR3600s keep on choosing the same channel. My IOT devices on 2.4GHz kept on dropping connection, perhaps because all of them are talking on the same band. This is silly. I’ve raised this before, but Cudy have not yet been able to fix this. Breaking my mesh into standalone units has resulted in a much better wireless experience for me. My device now all connect happily.
I can’t see from my main unit to which band a device connects to on another unit. After having two separate instances, I could see that some devices were connected to a band I didn’t want and I could correct this. This was not visible when in mesh mode.
Local latency, I.E. from my phone to default gateway also dropped from 70ms (Mesh) to about 6ms (standalone). This is while being about 7m away from my AP. No other change was made apart from going standalone.
I hope this helps someone else as I was about to replace my WR3600s. My experience is now much improved.
@Support
The issue is that when I configure the device to WPA2-only mode, the obsolete WPA1 protocol remains active. I have reported this multiple times, and you have stated it is not happening. However, my testing confirms it is. This situation suggests either a critical bug in the firmware or a lack of technical understanding of the issue on your support team. Please investigate this seriously
@Dear MN,
I see the picture. I think it doesn’t matter. We have removed the TKIP. So for now, is there any problem when connecting to this Wi-Fi?
“@Support
WR3600-R77-2.3.15Beta-20251027-094952-sysupgrade
WPA2-PSK only, WPA is still active
https://i.postimg.cc/6qFM0wzb/Screenshot-20260210-154034-Wi-Fi-Analyzer.jpg
https://github.com/VREMSoftwareDevelopment/WiFiAnalyzer"