WISP 模式：
在 WISP 模式下，路由器允许多个用户共享来自 WISP 的互联网连接。以这种方式，LAN 端口设备通过无线端口共享来自 WISP 的相同 IP。当连接到 WISP 时，无线端口用作 WAN 端口。
常见网络拓扑：
步骤 1： 打开 Web 浏览器并转到 http://cudy.net 或者 http://192.168.10.1 。
详情请参阅 如何登录 Cudy Router 的 Web 界面？
第 2 步： 将弹出快速设置窗口，选择“ WISP ”，然后转到“下一步”。
步骤3： 选择您的“时区”。
步骤4： 选择要扩展的主机网络。单击“连接” 。
或点击 常规设置-> WISP ->启用 然后选择要扩展的主机网络。
步骤5： 输入主机网络的无线密码。
笔记： 请确保您输入的无线密码正确，否则配置无法成功。
第 6 步： 自定义无线网络名称和密码或保持默认。
步骤7： 单击“保存并应用”完成配置。
步骤8： 等待系统重新启动几秒钟，当再次弹出登录页面时，您就可以享受互联网了。
120 条评论
@Dear Dmytro,
Please try to update the latest firmware of your Cudy. Then check if the problem is solved?
You can download the firmware for your Cudy based on the model of the device.
“https://www.cudy.com/pages/download-center/search”
“I have a problem that after Step 8 the router simply refuses to apply the new settings and reverts to factory settings instead. What shall I do?”
I have a problem that after Step 8 the router simply refuses to apply the new settings and reverts to factory settings instead. What shall I do?
@Dear Franc,
Our technical support has sent you the firmware via email. Please check.
“Hello Cudy Support.
I noticed a few requests in the comments for a beta version of the firmware that supports WISP on WR3600 router. If it’s not too much trouble, could you please send me this version via email? :)
Thank you, and have a nice day.”
Hello Cudy Support.
I noticed a few requests in the comments for a beta version of the firmware that supports WISP on WR3600 router. If it’s not too much trouble, could you please send me this version via email? :)
Thank you, and have a nice day.
Can I get a copy of the beta firmware capable of running either the WR3600 or the WR6500H in WISP mode? I have several of your routers but the inability to run WISP mode has been a major hindrance for my setup. Thank you.