常见网络拓扑：
步骤 1：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：将弹出快速设置窗口，选择“无线扩展器” ，然后转到“下一步” 。
步骤3：选择您的“时区” 。
步骤4：选择要扩展的主机网络。单击“连接” 。
第五步：输入主机网络的无线密码。
注意：请确保输入的无线密码正确，否则配置无法成功。
第六步：自定义Wi-Fi名称（SSID），密码与您的主机网络相同。
第七步：点击“保存并应用”完成配置。
步骤 8：将您的无线设备重新连接到新的 Wi-Fi 网络。
笔记：
1. 如果您使用有线设备设置无线扩展器模式，则设置后此设备可能无法上网。请拔下并插入以太网电缆或禁用并启用网络适配器以获取新连接。
2. 在无线扩展器模式下设置 Cudy 路由器后，IP 地址将由主路由器分配，默认 IP 地址 192.168.10.1 将无法登录。如果您需要再次登录 Cudy 路由器，请在浏览器中输入“ http://cudy.net”或在主路由器的客户端列表中查找 Cudy 路由器的 IP 地址。
63 条评论
@Dear Syed,
Sorry, when working on Client mode, it will detect if there is a DHCP server and get an IP address from the DHCP server. So I suggest you set the router to working on WISP mode. The router will enable the DHCP server. Please have a try. You can also disable the router’s 2.4GHz and 5GHz WiFi when working on WISP mode.
“Is it possible to have Cudy run its own dhcp server in cklient mode… I e have the cudy on a different subet… Xonnecting to wifi..then giving out IP on its own subnet to devies that connect to the cudy by wire or wirelessdly…
Router 1…wifi: ABCwifi..ip range 192.168.0.x
Connect wirelessly to …
Router 2 (Cudy) ..wifi:CudyWifi.IP Range: 192.168.25.xx…
?"
Is it possible to have Cudy run its own dhcp server in cklient mode… I e have the cudy on a different subet… Xonnecting to wifi..then giving out IP on its own subnet to devies that connect to the cudy by wire or wirelessdly…
Router 1…wifi: ABCwifi..ip range 192.168.0.x
Connect wirelessly to …
Router 2 (Cudy) ..wifi:CudyWifi.IP Range: 192.168.25.xx…
?
@Dear Chosen,
Please login to the web page of your Cudy router. Go to “General Settings” —“Wireless” function page. You will see the Wi-Fi name. You can change it here.
“I don’t know how to change my Wi-Fi nickname because I rebooted the Wi-Fi box by, mistake”
I don’t know how to change my Wi-Fi nickname because I rebooted the Wi-Fi box by, mistake
@Dear Artyom,
Thank you for contacting Cudy support team. IOur technical support has contacted you via email. Please check.
“I set up my cudy re 300 WiFi amplifier, but the program doesn’t see it, why is that?”