什么是接入点模式？
接入点模式是路由器使用有线连接到主路由器或调制解调器路由器来扩展家庭网络的无线覆盖范围。
常见网络拓扑：
步骤 1：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：将弹出快速设置窗口，选择“无线接入点” ，然后单击“下一步” 。
步骤3：选择您的“时区” 。
步骤4：确认硬件连接。
第五步：更改无线网络名称和密码。
步骤6：点击“保存并应用”完成配置。
第七步：等待系统重新启动几秒钟，当再次弹出登录页面时，您就可以享受互联网了。
笔记：
将 Cudy 路由器设置为接入点模式后，IP 地址将由主路由器分配，默认 IP 地址 192.168.10.1 将无法登录。如果您需要再次登录 Cudy 路由器，请在浏览器中输入“ http://cudy.net”或在主路由器的客户端列表中查找 Cudy 路由器的 IP 地址。
56 条评论
@Dear Mark,
Yes, it’s true. There is no Guest Network function when working on the Access Point mode.
“Hello, I’ve purchased one AX3000, I want to setup it as Access Point, not as router, I’ve read that is not possible setup a wifi for guest or setup additional SSID, is it true?
Thanks and regards,”
Hello, I’ve purchased one AX3000, I want to setup it as Access Point, not as router, I’ve read that is not possible setup a wifi for guest or setup additional SSID, is it true?
Thanks and regards,
@Dear Marian,
Thank you for your kindly advice! We will provide your feedback to the product department for evaluation.
“Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers”
Add vlan support for the routers. Or give ssh access so the users can create their own VLANs. Dont limit the usage of the routers
@Dear naz,
Yes, the LAN ports are still work. You can connect the devices to the LAN ports to share the network.
For WR3000, the main difference is that it uses the 16MB Flash. Other routers use 128MB Flash. Then WR3000 has to delete some functions, such as IPSec VPN, DNS over TLS, Zerotoer VPN etc. Other routers support all of these functions.
“Hi
If i setup a Cudy Wr3000s/e/h/p (one of them) in wifi ap mode, im i still able to use the ethernet ports to connect to desktops / other clients?
can you also let me know the differences between the s/e/h/p models of wr3000?
thanks.”