Cudy Whole Home Mesh 系统旨在消除死角，并为您的整个家庭提供不间断的 Wi-Fi。本文将指导您逐步构建网状系统。
准备：
1. 确保您拥有至少 2 件 Cudy 产品。
2.Cudy所有产品均支持mesh技术：首页Mesh-Cudy官网
3. 固件已更新：下载中心
4. 配置时将它们放在同一个房间。
5. 将所有 Cudy 产品重置为出厂默认设置。（打开电源后，用别针按住 RESET 按钮 6 秒钟，然后松开。）
6. 设置您的主路由器并使其连接到互联网。
这里我们以M1800和WR2100为例：
步骤 1 ：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：在系统状态页面，单击“+”按钮。
步骤 3 ：按下 M1800 上的 WPS 按钮，然后按下 WR2100 上的 WPS 按钮。
主网单元：闪光白
附加网格单元：白色和红色交替闪烁
步骤 4：它将进入“扫描”，然后进入“连接”。
步骤 5 ：等到附加路由器的系统 LED 变为常亮蓝色，然后重新定位 WR2100。
步骤 6 ：成功并享受网状网络。
笔记：
1. 4/5G 路由器只能设置为主网状单元。例如：
2. 您将无法登录附加网状路由器的 Web 界面。如果您要更改设置，请点击“系统状态”->“ Mesh ”。
83 条评论
I have 3 AP 1300 and 1 AC1200 outdoor all in mesh mode. AP 1300 all connected by LAN via L2 switches to server and AC 1200 by wi-fi.
All ap’s in one subnet and the clients in other. they all respond to ping and have stable connection. But when clients from same subnet ping each other it only work in same AP coverage. When one of clients moved to any other AP they lost each other however if they ping server or one of AP’s it work perfectly. so what’s the problem, why they not share arp table between each other?
@Dear Ahmed,
Yes, you install mesh system with M1200 and WR1300.
“Can I make a mesh between M1200 and WR1300 ? I have one M1200, if this is possible then I will buy WR 1300. Thanks.”
Can the TR3000 be connected in a mesh network with two M3000 v2 units? I need a USB port to be available in the mesh network.
Can I make a mesh between M1200 and WR1300 ? I have one M1200, if this is possible then I will buy WR 1300. Thanks.
@Dear ANTONIO,
Our technical support has sent you the firmware via email. Please check.
“Good morning. I need the updated firmware for the WR6500 router as the main mesh router and three M3000 units as mesh satellites. Can you send it to me by email?
Thank you.”