Cudy Whole Home Mesh 系统旨在消除死角，并为您的整个家庭提供不间断的 Wi-Fi。本文将指导您逐步构建网状系统。
准备：
1. 确保您拥有至少 2 件 Cudy 产品。
2.Cudy所有产品均支持mesh技术：首页Mesh-Cudy官网
3. 固件已更新：下载中心
4. 配置时将它们放在同一个房间。
5. 将所有 Cudy 产品重置为出厂默认设置。（打开电源后，用别针按住 RESET 按钮 6 秒钟，然后松开。）
6. 设置您的主路由器并使其连接到互联网。
这里我们以M1800和WR2100为例：
步骤 1 ：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：在系统状态页面，单击“+”按钮。
步骤 3 ：按下 M1800 上的 WPS 按钮，然后按下 WR2100 上的 WPS 按钮。
主网单元：闪光白
附加网格单元：白色和红色交替闪烁
步骤 4：它将进入“扫描”，然后进入“连接”。
步骤 5 ：等到附加路由器的系统 LED 变为常亮蓝色，然后重新定位 WR2100。
步骤 6 ：成功并享受网状网络。
笔记：
1. 4/5G 路由器只能设置为主网状单元。例如：
2. 您将无法登录附加网状路由器的 Web 界面。如果您要更改设置，请点击“系统状态”->“ Mesh ”。
83 条评论
Hi,
I have no cudy router as my main router, I’m going to disable wifi on that router and cerate mesh system viavwired backhaul. can I connect via eth 2 cudy m3000 and 2 ap3000 and cerate wired mesh between them with having fast roaming without creating subnet.
@Dear Kamil,
Yes, you can. Cudy mesh system supports Wired Backhaul. You can connect the WAN port of the satellite to the main mesh. It will work.
“Hi,
I have four wr3600e routers. One set as main router, and three as sattelites in wifi mesh mode. Can I connect one of them also with ethernet cable, to main router, to have better connection. This one is outside the building, and has low signal. BR Kamil”
Hi,
I have four wr3600e routers. One set as main router, and three as sattelites in wifi mesh mode. Can I connect one of them also with ethernet cable, to main router, to have better connection. This one is outside the building, and has low signal. BR Kamil
Dear Mionain, 1. What is the backhaul type between the main mesh AP and other APs? Wired or Wireless? 2. Is the problem on 2.4GHz or 5GHz or both? 3. When the problem occurs again, please login to the web page of the router, download the Diagnosis bin file in "Diagnostic Tools"->"Diagnosis"->"GO"->"Download", and send the file to me. My email address is samcudy.com.
“I have a Cudy AP3000 mesh network controller installed, and six AP1300 access points are connected to it via mesh networking. Wi-Fi is constantly disconnecting on mobile devices, both on the main Wi-Fi network and on the guest network. In extended mode, the phone displays the following error: “NETWORK_SELECTION_DISABLED_AUTHENTICATION_FAILED=3 NETWORK_SELECTION_DISABLED DHCP_FAILURE=1”
Meanwhile, the main router shows everything is fine, and none of the access points have disconnected from the mesh network. Computers are working reliably, but phones are constantly disconnecting. All access points are running the latest firmware. Could you please tell me what to do?"
I have a Cudy AP3000 mesh network controller installed, and six AP1300 access points are connected to it via mesh networking. Wi-Fi is constantly disconnecting on mobile devices, both on the main Wi-Fi network and on the guest network. In extended mode, the phone displays the following error: “NETWORK_SELECTION_DISABLED_AUTHENTICATION_FAILED=3 NETWORK_SELECTION_DISABLED DHCP_FAILURE=1”
Meanwhile, the main router shows everything is fine, and none of the access points have disconnected from the mesh network. Computers are working reliably, but phones are constantly disconnecting. All access points are running the latest firmware. Could you please tell me what to do?