Cudy Whole Home Mesh 系统旨在消除死角，并为您的整个家庭提供不间断的 Wi-Fi。本文将指导您逐步构建网状系统。
准备：
1. 确保您拥有至少 2 件 Cudy 产品。
2.Cudy所有产品均支持mesh技术：首页Mesh-Cudy官网
3. 固件已更新：下载中心
4. 配置时将它们放在同一个房间。
5. 将所有 Cudy 产品重置为出厂默认设置。（打开电源后，用别针按住 RESET 按钮 6 秒钟，然后松开。）
6. 设置您的主路由器并使其连接到互联网。
这里我们以M1800和WR2100为例：
步骤 1 ：打开网络浏览器并转到http://cudy.net或http://192.168.10.1 。
详细信息请参阅如何登录Cudy路由器的Web界面？
第 2 步：在系统状态页面，单击“+”按钮。
步骤 3 ：按下 M1800 上的 WPS 按钮，然后按下 WR2100 上的 WPS 按钮。
主网单元：闪光白
附加网格单元：白色和红色交替闪烁
步骤 4：它将进入“扫描”，然后进入“连接”。
步骤 5 ：等到附加路由器的系统 LED 变为常亮蓝色，然后重新定位 WR2100。
步骤 6 ：成功并享受网状网络。
笔记：
1. 4/5G 路由器只能设置为主网状单元。例如：
2. 您将无法登录附加网状路由器的 Web 界面。如果您要更改设置，请点击“系统状态”->“ Mesh ”。
83 条评论
@Dear Tib,
May be the signal strength of the P4 received by the M3000 is very weak at the placement of the M3000. Please try to adjust the placement of both routers to enhance the signal strength and check if the problem is avoided?
“I have a set if m3000 v1 and a p4 v1. The p4 is the mai router as I live in an area where internet fluctuates and it’s good for mobile feature. The problem is i have these m3000 i cannot connect to the p4. It only works with the cable. Are they incompatible? I am unable to find this information. The thing is when I try to add from p4 app they are discovered, but fail on connecting. Firmware are up to date on all. I even reset all to factory. I am writing this as cable is not a good option fo me. Should I put one of the m3000 as main router?
Thanks.”
I have a set if m3000 v1 and a p4 v1. The p4 is the mai router as I live in an area where internet fluctuates and it’s good for mobile feature. The problem is i have these m3000 i cannot connect to the p4. It only works with the cable. Are they incompatible? I am unable to find this information. The thing is when I try to add from p4 app they are discovered, but fail on connecting. Firmware are up to date on all. I even reset all to factory. I am writing this as cable is not a good option fo me. Should I put one of the m3000 as main router?
Thanks.
@Dear Geoffrey,
Thank you for advice. We have plan to add this feature in the future.
“As per Drew’s comment, I would like to also like a device to be able to prefer a particular node on a mesh network. I think that this would be a useful feature. I have a situation (that I’m still looking into) where my mobile phone will only connect with my streamer if they are both using the same mesh node – not sure why at the moment.
Geoff”
As per Drew’s comment, I would like to also like a device to be able to prefer a particular node on a mesh network. I think that this would be a useful feature. I have a situation (that I’m still looking into) where my mobile phone will only connect with my streamer if they are both using the same mesh node – not sure why at the moment.
Geoff
@Dear Drew,
Thank you for your kindly advice. We will provide your feedback to the product department for evaluation.
“Please make it so you can set devices to prefer a particular node on the mesh network. I want to benefit from the WiFi 7 MLO on my laptop, but sometimes it will switch to the secondary node and I don’t get the same benefits. This should be an easy feature-add! Thank you! We also need more control over clients, especially on guest networks.”