C200P 工作模式和拓扑结构

C200P 是一款功能全面的网络设备，集成了路由器和 AP 控制器功能，提供两种工作模式：主路由器和 AP 控制器（默认）以及AP 控制器模式。本指南提供设置说明和网络拓扑建议，以实现最佳性能。

1. 主路由器和AP控制器（默认）

在这种模式下，C200P 同时充当路由器和 AP 控制器。
建议管理≤10个AP和≤100个客户端。

拓扑结构 1：互联网 - C200P - 交换机 - AP

  • 使用场景：适用于管理多个 AP（需要交换机来扩展端口容量）。
  • 设置要求：
    • 将调制解调器连接到 C200P 的 WAN 端口，将 C200P 的 LAN 端口连接到交换机，再将 AP 连接到交换机。
    • 确保 C200P 和 AP 处于同一 VLAN中，因为 AP 管理流量不携带 VLAN 标签。
  • SSID VLAN 支持：
    • 启用 SSID VLAN 将使客户端数据在从 AP 发送出去时携带 VLAN 标签。
    • C200P 不支持 VLAN 或 VLAN 接口。
    • 要启用 SSID VLAN，交换机必须支持 VLAN、VLAN 接口和 DHCP 服务器，以便为 SSID VLAN 中的无线客户端分配 IP 地址。

拓扑结构 2：互联网 - C200P - AP

  • 使用场景：适用于≤4 个 AP的小型网络（受限于 C200P 的 4 个 LAN 端口）。
  • 设置要求：
    • 将调制解调器连接到 C200P 的 WAN 端口，将 AP 直接连接到 C200P 的 LAN 端口。
    • C200P、AP 和无线客户端在同一网络中运行。
  • SSID VLAN 支持：
    • 此拓扑中不支持SSID VLAN，因为 C200P 不支持 VLAN 或 VLAN 接口。

注： C200P未来将通过固件升级支持VLAN和VLAN接口。届时，即使交换机本身不支持VLAN，也可以在上述拓扑1和拓扑2中支持SSID VLAN。

2. AP控制器模式

在此模式下，C200P 仅作为 AP 控制器，管理 AP 配置和强制门户认证数据。

它支持≤200 个 AP ，客户端设备数量仅受网关或交换机容量的限制。

拓扑结构：互联网 - 路由器 - 交换机 - AP 和 C200P

  • 设置要求：
    • 将调制解调器连接到路由器，将路由器连接到交换机，再将 C200P 和 AP 都连接到交换机。
    • 将C200P切换至AP控制器模式：
      • 登录C200P网页界面。
      • 进入快速设置并选择AP 控制器模式。
    • 确保 C200P 和 AP 处于同一 VLAN中，因为 AP 管理流量不携带 VLAN 标签。
  • SSID VLAN 支持：
    • 要启用 SSID VLAN，网关或交换机必须支持 VLAN、VLAN 接口和 DHCP 服务器，以便为 SSID VLAN 中的无线客户端分配 IP 地址。

如需进一步帮助，请联系我们的支持团队：support@cudy.com。

返回博客

37 条评论

And one more question, is there firewal between VLANS ? I make few vlans for test and from every vlan i am able to access cudy GUI with multiple scenarios (enabled management VLAN, disabled managemnt VLAN) etc. In current situation its just create multiple DHCP servers and clients are able to reach others acros VLANS. No efect what are we expecting from VLAN settings

Lubos

When do we have firmware update for wall APs as descipted in c200p update release:

Note: Features 6–9 require AP firmware version 2.5.x or later.

Thank you

Lubos

Thanks for the update for C200P. Now only alias mode for R700 and we are done :D just kidding but this should be great.

Lubos

Hello Cudy Support,

Thank you for your previous response regarding the firmware update for the C200P.

As I understand it, the new firmware that should add support for WAN IP aliasing is still under development. While waiting for that version, I would like to ask whether it would be possible to obtain a firmware build with SSH access enabled, or an official method to enable SSH access.

My only goal is to configure an additional IP address (WAN alias / secondary WAN IP) on the WAN interface, which is currently not possible through the web interface. I am comfortable working with Linux/OpenWrt-based systems and would be happy to use SSH for this purpose until the official firmware becomes available.

I am currently evaluating the C200P for a larger deployment and plan to purchase approximately 200 units. The missing WAN alias functionality is currently the only feature preventing me from starting the implementation. I would prefer not to wait for the final firmware release if there is already a beta firmware, engineering firmware, or another supported way to enable SSH access and configure this feature.

Even a temporary solution with SSH access would help me move forward with testing and deployment planning.

Thank you for your help and support. I look forward to your response.

Best regards,

Lubos

@Dear Lubos,
Thank you for your feedback! We will provide your feedback to the product department for evaluation.

“Wan alias option with static ip adress on wan is really missing. Not enough only in ppoe mode. Please update it”

Support

发表评论