Cudy App Support Plan

แผนสนับสนุนแอป Cudy

รายการนี้อัปเดตเมื่อวันที่ 19 มิถุนายน 2024

รุ่นที่เปิดตัว: ดูที่นี่ 

หลังจากคลิกเข้าไปในรายการรุ่น คุณสามารถกรองตัวแปรของ "Cudy App" และ "Cudy App Local" ได้ในตัวเลือกตัวกรอง "ขั้นสูง" รุ่นที่มี "Cudy App" เสนอวิธีการจัดการทั้งภายในและระยะไกล รุ่นที่มี "Cudy App Local" รองรับวิธีการจัดการในเครื่อง ซึ่งหมายความว่าผู้ใช้สามารถควบคุมอุปกรณ์ในขณะที่เชื่อมต่ออยู่ได้

เร็วๆ นี้ในเดือนมิถุนายน:

  • ตัวขยายช่วง: RE1200 กลางแจ้ง*
  • 4G/5G: LT15V, LT700V

โปรดตรวจสอบให้แน่ใจว่าเฟิร์มแวร์ของอุปกรณ์ของคุณเป็นเวอร์ชันล่าสุดก่อนที่จะใช้คุณสมบัติการควบคุมแอป นี่คือคำถามที่พบบ่อยเกี่ยวกับวิธีอัปเกรดเฟิร์มแวร์ของคุณ

เรายินดีต้อนรับคุณในการแบ่งปันความคิดและคำแนะนำของคุณโดยไปที่ด้านล่างบทความนี้

เรียนรู้เพิ่มเติมเกี่ยวกับแอป Cudy

เกี่ยวกับคิวดี้

Cudy ก่อตั้งขึ้นในปี 2018 และมีสำนักงานใหญ่ในเซินเจิ้น โดยเป็นบริษัทที่ขับเคลื่อนด้วยเทคโนโลยีที่มีการแข่งขันสูงในด้านการวิจัยและพัฒนาและการผลิตผลิตภัณฑ์ไร้สายและเครือข่าย กลุ่มผลิตภัณฑ์ครอบคลุมเราเตอร์ Wi-Fi Mesh, เราเตอร์ OpenWRT, รีพีทเตอร์, เราเตอร์ CPE 4/5G, PoE, สวิตช์ และอุปกรณ์ Smart Home IoT

ติดต่อฝ่ายประชาสัมพันธ์: pr@cudy.com
Cudy@LinkedIn
Cudy@Facebook
กลับไปยังบล็อก

609 ความคิดเห็น

I have been tryin to change my WiFi password but I didn’t make it through so what next

Sekhukhune

Mi dispositivo está bloqueado

Yulexi Rojas

@Dear khondker,
If the password is wrong, you can’t login to the router via Cudy APP. The password is the administrator password for login to the web management page of the router. If you forget it, you can try to reset the router to factory default by long pressing the reset button for about 3 seconds. You can release the reset button when the LED flashes. You must create a new password when first login to the web page of the router.
Note: All the configuration will be cleared. You must reconfigure the router after resetting your router.

“Password problem”

support

@Dear Kyle Bennett,
1. What is the model of your router? You can check the model on the label at the bottom of the router.
2. Which working mode do you set on the router?
3. What is the LAN IP address you set? Is it 192.168.10.1 by default?

“I can’t see connected devices”

support

Password problem

khondker

แสดงความคิดเห็น