ดาวน์โหลดซอฟต์แวร์ OpenWrt

คำเตือน

หน้าเว็บนี้แสดงรายการซอฟต์แวร์ของอุปกรณ์ที่รองรับระบบ OpenWrt ก่อนที่จะดาวน์โหลดและติดตั้งซอฟต์แวร์ โปรดทราบว่า OpenWrt Project เป็นระบบปฏิบัติการ Linux ที่กำหนดเป้าหมายไปที่อุปกรณ์ฝังตัว แทนที่จะพยายามสร้างเฟิร์มแวร์แบบคงที่เพียงตัวเดียว OpenWrt มอบระบบไฟล์ที่สามารถเขียนได้อย่างสมบูรณ์พร้อมการจัดการแพ็คเกจ ซึ่งช่วยให้คุณไม่ต้องเลือกแอปพลิเคชันและการกำหนดค่าที่ผู้จำหน่ายให้มา และช่วยให้คุณปรับแต่งอุปกรณ์ผ่านการใช้แพ็คเกจเพื่อให้เหมาะกับแอปพลิเคชันใดๆ สำหรับนักพัฒนา OpenWrt เป็นเฟรมเวิร์กสำหรับสร้างแอปพลิเคชันโดยไม่ต้องสร้างเฟิร์มแวร์ที่สมบูรณ์ สำหรับผู้ใช้ นี่หมายถึงความสามารถในการปรับแต่งได้อย่างเต็มที่ เพื่อใช้อุปกรณ์ในแบบที่ไม่เคยคิดมาก่อน

คำอธิบาย

  1. ไฟล์นี้สามารถใช้ได้เมื่อเราเตอร์ของคุณทำงานภายใต้ Cudy web UI เท่านั้น
  2. หากเราเตอร์ทำงานภายใต้ OpenWRT UI อยู่แล้ว ผู้ใช้ควรคืนค่าเป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ก่อน จากนั้นอัปเกรดเราเตอร์ด้วยเฟิร์มแวร์นี้
  3. จะคืนค่าเราเตอร์เป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ได้อย่างไร โปรดอ่าน readme ในไฟล์ที่ดาวน์โหลด

การรับประกัน:

คิวดี้ขอประกาศ

  1. เรา Cudy ไม่รับประกันซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  2. เราไม่รับประกันใด ๆ สำหรับผลิตภัณฑ์ที่ติดตั้งซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  3. หากคุณต้องการใช้ซอฟต์แวร์ openwrt เราขอแนะนำให้คุณดาวน์โหลดจากเว็บไซต์อย่างเป็นทางการของ Cudy

ดาวน์โหลดเฟิร์มแวร์ OpenWrt เพื่อลบการตรวจสอบลายเซ็น: ไดรฟ์

เครื่องมือค้นหาเฟิร์มแวร์ OpenWrt (ไม่เผยแพร่โดย Cudy): ตัวเลือกเฟิร์มแวร์ OpenWrt 

กลับไปยังบล็อก

1319 ความคิดเห็น

Now I see the problem, which comes from a confusion in the flashing order after our communication from Nov 14 and 17…
‘’@Dear JC,
Please download use the sysupgrade version.
“Hi,
From previous reply this morning, what you mean with Cudy Google drive is
https://firmware-selector.openwrt.org/ ?
There are 2 possible downloads from there for wr3000h: sysupgrade and kernel. What you call intermediate firmware is the kernel one?”’’
I then started with the sysupgrade !

Wallard

Hi again,
I didn’t wait and I applied the procedure here: https://www.cudy.com/fr-fr/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware
The problem is the recovery.bin file doesn’t upload.

JC

Hi,

I have the same problem as Manos on Nov 20th except I have a WR3000H.

“wanted to do Cudy WR3000 on OpenWRT and I installed the WR3000+V1 without recovery TFTP file. After it was completed, it told me to wait for the reboot, it never happened, it told me that I am not connected and now the cudy wr3000 does not start at all, it does not connect to any ip 192.168.1.1 or 192.168.10.1. What can I do?”

This cudy_wr3000h-v1-sysupgrade_20251119.bin file was not supposed to do this, I think.

JC

Cudy M3000 1.0 kindly please add DNS over HTTPS. I’ve seen TP-Link Deco X50 has got it via firmware update but not my Cudy M3000 1.0 have it yet.

Also, my Cudy M3000 1.0 don’t have separate network creation for IoT devices!! TP-Link has this feature!!!

ABDULLAH

@Dear JC,
You router still uses the old Flash model. You can update the OpenWrt firmware. Don’t worry about it.
2513 in the SN means the thirteen week in the year 2025. At that time, we still uses the old flash.

“Hi,
I’ve just received my WR3000H from Amazon. I intended to switch to OpenWRT but I’m learning that you changed the ROM in this model recently and the flash will no longer work until your proposed patch has been validated and merged.
First, is my model with S/N WR3000H251301647 EU1.0 concerned? How can I check? I won’t open the device.
Second, what should I do now?”

Support

แสดงความคิดเห็น