ดาวน์โหลดซอฟต์แวร์ OpenWrt

คำเตือน

หน้าเว็บนี้แสดงรายการซอฟต์แวร์ของอุปกรณ์ที่รองรับระบบ OpenWrt ก่อนที่จะดาวน์โหลดและติดตั้งซอฟต์แวร์ โปรดทราบว่า OpenWrt Project เป็นระบบปฏิบัติการ Linux ที่กำหนดเป้าหมายไปที่อุปกรณ์ฝังตัว แทนที่จะพยายามสร้างเฟิร์มแวร์แบบคงที่เพียงตัวเดียว OpenWrt มอบระบบไฟล์ที่สามารถเขียนได้อย่างสมบูรณ์พร้อมการจัดการแพ็คเกจ ซึ่งช่วยให้คุณไม่ต้องเลือกแอปพลิเคชันและการกำหนดค่าที่ผู้จำหน่ายให้มา และช่วยให้คุณปรับแต่งอุปกรณ์ผ่านการใช้แพ็คเกจเพื่อให้เหมาะกับแอปพลิเคชันใดๆ สำหรับนักพัฒนา OpenWrt เป็นเฟรมเวิร์กสำหรับสร้างแอปพลิเคชันโดยไม่ต้องสร้างเฟิร์มแวร์ที่สมบูรณ์ สำหรับผู้ใช้ นี่หมายถึงความสามารถในการปรับแต่งได้อย่างเต็มที่ เพื่อใช้อุปกรณ์ในแบบที่ไม่เคยคิดมาก่อน

คำอธิบาย

  1. ไฟล์นี้สามารถใช้ได้เมื่อเราเตอร์ของคุณทำงานภายใต้ Cudy web UI เท่านั้น
  2. หากเราเตอร์ทำงานภายใต้ OpenWRT UI อยู่แล้ว ผู้ใช้ควรคืนค่าเป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ก่อน จากนั้นอัปเกรดเราเตอร์ด้วยเฟิร์มแวร์นี้
  3. จะคืนค่าเราเตอร์เป็นเฟิร์มแวร์อย่างเป็นทางการของ Cudy ได้อย่างไร โปรดอ่าน readme ในไฟล์ที่ดาวน์โหลด

การรับประกัน:

คิวดี้ขอประกาศ

  1. เรา Cudy ไม่รับประกันซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  2. เราไม่รับประกันใด ๆ สำหรับผลิตภัณฑ์ที่ติดตั้งซอฟต์แวร์ใด ๆ ที่ไม่ได้เผยแพร่โดย Shenzhen Cudy Technology Co., Ltd.
  3. หากคุณต้องการใช้ซอฟต์แวร์ openwrt เราขอแนะนำให้คุณดาวน์โหลดจากเว็บไซต์อย่างเป็นทางการของ Cudy

ดาวน์โหลดเฟิร์มแวร์ OpenWrt เพื่อลบการตรวจสอบลายเซ็น: ไดรฟ์

เครื่องมือค้นหาเฟิร์มแวร์ OpenWrt (ไม่เผยแพร่โดย Cudy): ตัวเลือกเฟิร์มแวร์ OpenWrt 

กลับไปยังบล็อก

1536 ความคิดเห็น

@Dear Timur,
OK, We will offer you later. Please wait patiently.

“Hello support!
I was create prereleased OpenWRT binary for Cudy WR1300S.
This kernel https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-initramfs-kernel.bin
and Sysupgrade https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-squashfs-sysupgrade.bin
Can you make intermediate transition firmware to switch from stock firmware to OpenWRT ?”

Support

@Dear Bourn,
We need the OpenWrt forum official support the router at first, then we can release a middle firmware for you, then you can use and upgrade to the OpenWrt firmware. Do you have the OpenWrt firmware for AP3000D? If yes, please share it to us.

“Hello Cudy Support,

Could you please send me the intermediate firmware for the AP3000D?
I would like to test installing custom OpenWRT firmware.

Best regards"

Support

@Dear conrad,
Our technical support has sent you the new intermediate firmware via email. Please check.

“Dear Support !

I have already connected the serial port and restored the functionality of the cudy AP3000_P v1.
But your transition firmware does not have a recovery mode and does not support the new Motorcomm YT8821 PHY LAN chip.
Could you provide an updated version of the transition firmware for openwrt so that I do not have to restore the access point using the serial port in the future?"

Support

Hello support!
I was create prereleased OpenWRT binary for Cudy WR1300S.
This kernel https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-initramfs-kernel.bin
and Sysupgrade https://github.com/5yoda5/openwrt/releases/download/first_release/openwrt-ramips-mt7621-cudy_wr1300s-squashfs-sysupgrade.bin
Can you make intermediate transition firmware to switch from stock firmware to OpenWRT ?

Timur

Hello Cudy Support,

Could you please send me the intermediate firmware for the AP3000D?
I would like to test installing custom OpenWRT firmware.

Best regards

Bourn

แสดงความคิดเห็น