ดาวน์โหลดซอฟต์แวร์ OpenWrt

@Dear Michael,
You can try to recover the old firmware version. Such as the 2.0.0, 2.2.6. Please connect the LAN port when recovering the firmware.

“Hi Cudy Support Team , I have purchased cudy wr3000 v1 router at the end of y 2023 ,I’ve successpully installed openwrt on my router using intermideate Cudy firmware, that was about 2 years ago. Then year after at 2024 ,I decided to go back to Cudy’s official firmware using OpenWrt system update and latest official firware at that moment .But something went wrong ( as I understood, there was some internal flash incompatibility with newer firmwares and older routers caused by internal flash)
As for today 2026 , my WR3000 v1 router is bootlooping endlessly but I’m able to upload firmware using tftp64.
What I’ve tried:
– Uploading latest official firmware v WR3000-R31-2.4.19 via tftp64 (using WAN port and LAN1 port )
– Uploading itermideate firmware from google drive , using tftp64 via LAN1 port and WAN port ,
– Uploading latest openwrt firmware v24.10.5 using tftp64 via WAN and LAN1 port .
- Uploading openwrt kernel only firmware based on v24.10.5 via WAN and LAN1 port .
Only when uploade official Cudy firmware ,the device rebooted itself autoamtically afer 3-4 minutes. In all cases the device is bootloping after manual or automatic restart.
Do you have any suggestions ? Maybe some firwmare to restore the device ?”

@Dear Frank,
The intermediate firmware WR3000S 1.0.zip is in the Google Drive.
“Hi again cudy team.
My bad, I was pretty sure I’ve downloaded the right image for wr3000s, looked several times and took me a while to realize it isn’t. Nevertheless learned R59/R53 error message is true about wrong image. Looking forward to sharing more beneficial content moving forward with OpenWRT on wr3000s.”

@Dear Alexander996,
The intermediata firmware is TR3000 V1_20251118.zip in the Google Drive. Please download it and update.

“Dear Cudy team. I want to flash my Cudy TR3000 router (serial number TR30002545, that is, with a new flash memory chip). And I need OpenWRT version 24.10.5. But you don’t have this version on google drive (there is only 24.10.4), which will turn my Cudy TR3000 into a brick. When will the official release “transitional” version of OpenWRT 24.10.5 from cudy? So that I can upgrade/flash my Cudy router? Could you please send me the official version, which is suitable for my model (with new flash memory chips)?”

@Dear Frank，
WR300S is a 2.4GHz Wi-Fi router with 802.11n protocol. There are only two antennas on the router. Are you sure it is the correct model name? You can find the description via the following link.
https://www.cudy.com/products/wr300s-1-0?pos=1&_sid=ddc734592&ss=r
If yes, there is no intermediate firmware for WR300S currently.

“Dear cudy team,

I’ve bought WR300S v1, serial# starting 2531 based on multiple good reviews and OpenWRT capabilities. I’ve followed your suggestion downloading the firmware from the Google drive but don’t succeed. Checking the system log I found the following error message:
Tue Jan 13 16:24:33 2026 daemon.err uhttpd4489: Tue Jan 13 16:24:33 CET 2026 upgrade: Device R59 not supported by this image
Tue Jan 13 16:24:33 2026 daemon.err uhttpd4489: Tue Jan 13 16:24:33 CET 2026 upgrade: Supported devices: cudy,wr3000e-v1 R53
Tue Jan 13 16:24:33 2026 daemon.err uhttpd4489: lede: firmware name error(R59 R53)
Tue Jan 13 16:24:33 2026 daemon.err uhttpd4489: Image check failed.
Same applies for OpenWRT sysupgrade image v 24.10.5

Is there an intermediate version available you can share which allows running OpenWRT?
Thanks in advance"

Hi Cudy Support Team , I have purchased cudy wr3000 v1 router at the end of y 2023 ,I’ve successpully installed openwrt on my router using intermideate Cudy firmware, that was about 2 years ago. Then year after at 2024 ,I decided to go back to Cudy’s official firmware using OpenWrt system update and latest official firware at that moment .But something went wrong ( as I understood, there was some internal flash incompatibility with newer firmwares and older routers caused by internal flash)
As for today 2026 , my WR3000 v1 router is bootlooping endlessly but I’m able to upload firmware using tftp64.
What I’ve tried:
– Uploading latest official firmware v WR3000-R31-2.4.19 via tftp64 (using WAN port and LAN1 port )
– Uploading itermideate firmware from google drive , using tftp64 via LAN1 port and WAN port ,
– Uploading latest openwrt firmware v24.10.5 using tftp64 via WAN and LAN1 port .
- Uploading openwrt kernel only firmware based on v24.10.5 via WAN and LAN1 port .
Only when uploade official Cudy firmware ,the device rebooted itself autoamtically afer 3-4 minutes. In all cases the device is bootloping after manual or automatic restart.
Do you have any suggestions ? Maybe some firwmare to restore the device ?