ดาวน์โหลดซอฟต์แวร์ OpenWrt

Нет прошивки для Cudy WR1200E

How to recover WR3000P in case of a corrupted bootloader? Which UART-to-USB cables work? How to access the BootROM Download Mode? How to make a full memory dump before experimenting with OpenWrt and how to restore from it? Since you had generously provided guides and firmware for the OpenWrt installation, it would be nice if you made an instruction for the de-bricking. Thank you!

Hi,
I flashed my Cudy M3000 V1 with the image cudy_m3000-v1-sysupgrade_20251119.bin as described above. After that I can’t access the device anymore, at least not at the ports 22, 80 and 443. But I’m able to ping the device. Is there a description what else to do?

@Уважаемый Андрей,
Наша техническая поддержка отправила вам промежуточную прошивку по электронной почте. Пожалуйста, проверьте.

“нет прошивки на WBR3000UAX. где её можно скачать ?”

@Dear Jon,
I am not sure why you can’t. Please record a screen video to show me the problem. I will send you a email. Please reply me back with the screen video.

“Following the openwrt saga. I have several M3000 v1 units and cannot load ANY openwrt file, even with original FW back to 2.0.0. This is very frustrating and I am openly thinking about replacing the whole system (4x M3000, 1x AP3000 Out)… I need separate wireless networks and being limited to 2.4 and 5 is useless… I need a separate 2.4 network for IOT as well as a separate 5 network for IOT, a merged 2.4/5 for everything else and then a guest network…”