ดาวน์โหลดซอฟต์แวร์ OpenWrt

Subject: Request: OpenWrt intermediate firmware for RE1200 V1.0 (same as RE1200 Outdoor)

Hello,

I’d like to install OpenWrt on my Cudy RE1200 V1.0 (current firmware: RE1200-R14-2.4.20-20250908-170954).

I understand that for the RE1200 Outdoor, Cudy provides a signed “intermediate firmware” that removes the bootloader’s firmware signature/image-name check, after which standard OpenWrt builds can be installed. Could you provide the equivalent intermediate firmware for the RE1200 V1.0 (board/image name “R14”)?

I previously contacted support about this and was told no OpenWrt firmware exists yet for the RE1200 V1.0, so no intermediate firmware is offered. Since the RE1200 V1.0 uses the same MT7628-based hardware and the same U-Boot signature-check mechanism as the RE1200 Outdoor (just a different board/image name, “R14” vs “R56”), I wanted to ask directly whether an R14-specific intermediate firmware could be built, the same way it was for the Outdoor.

If it would help, I’m happy to provide my current firmware version, board revision, or any other details needed.

Thank you for your time.

Arham

@Dear support,
If you have installed Mesh system with the router. You can’t update the firmware. Please power off the other Mesh device. Then reset this router to factory default. You can update this firmware before mesh system installed.

“Hello, I have Cudy M3000 v1. When trying to do local update – Im getting “File is not compatible with the device model(s).” Im doing something wrong?”

@Уважаемый Максим,
Нет, не поддерживает.

“Здравствуйте, поддерживает ли какую нибудь прошивку openwrt роутер cudy wr3000 процессор (Triductor TR6560P), если да, то подскажите какую?”

Hello, I have Cudy M3000 v1. When trying to do local update – Im getting “File is not compatible with the device model(s).” Im doing something wrong?

Здравствуйте, поддерживает ли какую нибудь прошивку openwrt роутер cudy wr3000 процессор (Triductor TR6560P), если да, то подскажите какую?