ดาวน์โหลดซอฟต์แวร์ OpenWrt

@Dear IURII,

Do you install mesh system with other Cudy routers? If yes, you can reset the router to factory default. Do not install mesh system with other Cudy routers. Then update it again.

“Hello,

I have a Cudy WR3000P V1.0 (EU).

Current firmware:
2.4.22-20251125-101108

Serial Number:
S0001005261700095

When I try to install the OpenWrt intermediate firmware
cudy_wr3000p-v1-sysupgrade_20251119.bin
(downloaded from the OpenWrt Software Download page),
the router rejects it with the message:

“Invalid file. Please try again.”

Could you please provide the correct intermediate firmware
for this hardware revision and firmware version?

Thank you."

Hello,

I have a Cudy WR3000P V1.0 (EU).

Current firmware:
2.4.22-20251125-101108

Serial Number:
S0001005261700095

When I try to install the OpenWrt intermediate firmware
cudy_wr3000p-v1-sysupgrade_20251119.bin
(downloaded from the OpenWrt Software Download page),
the router rejects it with the message:

“Invalid file. Please try again.”

Could you please provide the correct intermediate firmware
for this hardware revision and firmware version?

Thank you.

@Dear Anders F,
Maybe there is something wrong with the hardware. Please contact the seller to request a replacement and try again.

“Yes. I downloaded and unzipped “AP3000 V1.0.zip”, which contains ’cudy_ap3000-v1-sysupgrade_20260224.bin. Flashing that though the UI resulted in resulted in an infinite boot cycle (The AP showed a read light, blinking white/light blue every 10 seconds), which I recovered using TFTP using cudy stock image.

“If the file name of the intermediate firmware is “cudy_ap3000-v1-sysupgrade_20260224.bin”?""

Yes. I downloaded and unzipped “AP3000 V1.0.zip”, which contains ’cudy_ap3000-v1-sysupgrade_20260224.bin. Flashing that though the UI resulted in resulted in an infinite boot cycle (The AP showed a read light, blinking white/light blue every 10 seconds), which I recovered using TFTP using cudy stock image.

“If the file name of the intermediate firmware is “cudy_ap3000-v1-sysupgrade_20260224.bin”?"

@Уважаемый dima,
На данный момент прошивки OpenWRT для WR1300E V2.0 нет.

“Доброго дня. Хотел прошить WR1300E V2.0 на openwrt. Но при попытке загрузить прошивку с GDrive получаю ошибку “Файл заблокирован. Пожалуйста, повторите попытку.” Подскажите как обновиться.”