ดาวน์โหลดซอฟต์แวร์ OpenWrt

Версия прошивки
2.4.19-20250828-192837

Аппаратная версия
WR3000 V1.0 SN:WR3000254901313 EAEU1.0

@Dear Паве,
Please check the model and Firmware page and send it to me again. I think you offer the wrong modle. Or you can send me the full SN number and send it to us for checking.

“Dear Cudy Support,

I am trying to install OpenWrt on my WR3000E V1.0 router but encountering an issue.

Device information:
- Model: WR3000E V1.0
- Serial Number: 2549XXXXX (new revision with NAND flash F50L1G41LC, SN ≥ 2543)
- Current firmware: 2.4.19-20250828-192837

Problem:
I downloaded the file “cudy_wr3000e-v1-sysupgrade_20251119.bin” (MD5: 249c150e7676facc9f33d79e634ec4a3) but the router rejects it with “Invalid file” error.

I understand that routers with SN ≥ 2543 require a special intermediary firmware compatible with the new flash chip (post-November 2025). The file dated 2025-11-19 appears to be for older revisions only.

Could you please provide the correct intermediary firmware for WR3000E V1.0 with new flash (SN 2549)?

Thank you for your assistance.

Best regards, Pavel"

Dear Cudy Support,

I am trying to install OpenWrt on my WR3000E V1.0 router but encountering an issue.

Device information:
- Model: WR3000E V1.0
- Serial Number: 2549XXXXX (new revision with NAND flash F50L1G41LC, SN ≥ 2543)
- Current firmware: 2.4.19-20250828-192837

Problem:
I downloaded the file “cudy_wr3000e-v1-sysupgrade_20251119.bin” (MD5: 249c150e7676facc9f33d79e634ec4a3) but the router rejects it with “Invalid file” error.

I understand that routers with SN ≥ 2543 require a special intermediary firmware compatible with the new flash chip (post-November 2025). The file dated 2025-11-19 appears to be for older revisions only.

Could you please provide the correct intermediary firmware for WR3000E V1.0 with new flash (SN 2549)?

Thank you for your assistance.

Best regards, Pavel

@Dear ahmed,
You router is WR3000, not WR3000E. I have sent you the correct firmware.

““Dear Cudy Support Team,
Doesn’t work
File is invalid. Please retry.
Uploaded File: cudy_wr3000e-v1-sysupgrade.bin
Size: 12.63 MB (13241931 B)
MD5: 77e6d84f93081732d4c130521078991a

@Dear Ahmed Elbiomy,
Our technical support has sent you the firmware via email. Please check.

“Dear Cudy Support Team,

I am writing to request the correct intermediate firmware file needed to install OpenWrt on my router.

My router details are:

· Model: Cudy WR3000E
· Hardware Version: v1.0
· Current Firmware Version: 2.2.6-20240902-033948

I have tried several intermediate files, but they were rejected. Could you please provide me with the correct intermediate firmware file compatible with my current firmware version?

Thank you for your assistance.""

Dear CUDY support! Earlier, with your help, I updated my AP3000 v1 to openwrt. Now I need to revert to the factory software. The LUCI web interface complains about an invalid file, and holding down the reset button and supplying power doesn’t work either. Can you help me figure out what to do?