ดาวน์โหลดซอฟต์แวร์ OpenWrt

Is it possible to add an image to unlock the WR3000E? I see the normal WR3000 already has one, but it of course does not work. I’d like to begin work on porting OpenWRT to this device.

Could you kindly pleeease add openwrt software for Cudy M1300 on the list.
It will be very helpful.
Thank you.

@Marek,
OK,I have forwarded you request to our R&D team. Please wait patiently for the intermediate firmware.

“It seems something has changed in the bootloader installed with the latest WR300 firmware (WR300-R54-2.2.8-20241015-162008-flash) – after downgrade to the older version (WR300-R54-1.16.15-20231130-131612-flash) I can see normal messages at 115200 again, no more garbage.
Could you tell me how to stop u-boot so I can load the OpenWrt image (built by me, not signed by you) – it boots the original firmware from flash without any delay, and no Linux shell access is possible.”

@Tadeusz
Dear Customer.
Thank you for contacting Cudy support team.
The new IP address of the router after update the intermediate firmware is 192.168.1.1 255.255.255.0, please try again. If still can’t login to the web page. Please try to recover the firmware to Cudy firmware according to the instruction on the website.
https://www.cudy.com/blogs/faq/how-to-recovery-the-cudy-router-from-openwrt-firmware-to-cudy-official-firmware?pos=1&_sid=75e4fd020&ss=r

Then update the OpenWrt firmware again.

“Hi Cudy Support,
I followed your manual – First update the intermediate firmware from GoogleDrive to remove signature. Second Use https://firmware-selector.openwrt.org/?version=24.10.0&target=mediatek%2Ffilogic&id=cudy_wr3000s-v1.
I uploaded intermediate via GUI. My router WR3000s rebooted itself. Now only system LED is turned on and WAN and LAN1. I cannot get via any 192.168.×.×.
Could you help in this case, please?
Regards,
Tadeusz”

It seems something has changed in the bootloader installed with the latest WR300 firmware (WR300-R54-2.2.8-20241015-162008-flash) – after downgrade to the older version (WR300-R54-1.16.15-20231130-131612-flash) I can see normal messages at 115200 again, no more garbage.
Could you tell me how to stop u-boot so I can load the OpenWrt image (built by me, not signed by you) – it boots the original firmware from flash without any delay, and no Linux shell access is possible.